This message was posted by Christine on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/421.html Hi There, I have a design that uses the "wrap". For some though the colours/needles are all listed as they should be - the machine - at one of the changes decided to select a different colour/needle number entirely - where it should have been the "green" I got a silver. Has anybody else had this issue? I did change a parameter in the "Settings by Color" tab because I was receiving false bobbin breaks. I did notice that the pallet had ADDED 2 X the same colour I had edited at the end of the pallet of the design. Though the additions were needle 1 - it actually selected needle 10 (silver). Hopefully someone may have a hint. Thanks =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================