This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/337.html#000001 take your hoops, and with a black marker and a ruler-mark the dead center of horizontal and vertical on the top frame of each hoop. Go down the 'inside' of the hoop also-so the line will touch the shirts when you start hooping. Using seamstress chalk to make your lines on the shirt-make them long enough so the hoop will land on them-now you can line up dead on. If you are still crooked-then it is from whatever part of the shirt you are using as a 'straight edge' to get your alignment. On polos-button them all the way up and see if it is straight. Usually people don't button them up-and that makes the design look tilted but it is still correct. If you hold them up in front of you after sewing it will do the same thing. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================