[amayausers.com] Re: Backing for Baby sleepers/Hoop for sleepers
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 17 Jan 2010 16:18:38 UT
This message was posted by Tricia on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1113/2.html#000015
OK... Fred's samples have arrived and I also bought SULKY "Tender Touch" iron
on stitch cover (at JoAnn's). I applied them both to these baby sleepers and
then laundered them...they both came off! I used the Med setting on the iron
(it still may have been too hot), and cut a generous piece to apply. Any
thoughts to what went wrong?
Fred--I assumed a med iron setting, there weren't any instructions with the
samples.
Thank you everyone! This is an important project for me!
Tricia
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
