[amayausers.com] Re: Autodigitize in v9
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 3 Feb 2010 16:15:18 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/502.html#000001
A 'quick' rule of thumb is to estimate 1000 stitches per square inch...unless
you have multiple overlays of color on color...so a 2" x 4" logo could have
8,000 stitches for a light design. Gives you a starting point.
Otherwise, if you autodigitize, pull down the 'stitch tree' and look at the
last stitch number-that will give you a close idea. I've noticed that when a
design goes from DS to Amaya OS, for stitching-the stitch count is a little
less.Not sure what gets subtracted but they never match. Take a couple of
designs you've done, figure the square inch-and see if you are in the 1000 spi
(stitch per inch) or if you like heavy fills, you might be higher on average.
Then you have a quicky way to quote.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
