Hi Adrien, Every time you plug into a different port, it allocates a different port number. So if you tried each port, you would get the hardware found message with each of them. But only once. All the best Steve -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Adrien Collins Sent: Monday 4 February 2008 14:16 To: 'access uk' Subject: [access-uk] usb gadgets Hi Please could somebody explain to me why all my usb devices keep bringing up the found new hardware manager? For example, if I plug my toshiba flash drive in to it's normal port it works ok but if I plug it into a usb hub on the same hub it brings up the found new hardware program. I have just plugged in my mini usb mouse on a hub on my laptop and it brought up the found new hardware program and I switched it onto another port on the same hub and it brought up the found new hardware thing again, why is it doing this? Is there not a generic driver for all usb devices? Regards Adrien You can get me off list at adriencollins06@xxxxxxx or adrien_collins@xxxxxxxxxxx Speakon is a free fully self-voicing accessible multimedia program for the visually impaired, find out more by downloading the software from: http://www.a-technic.net/speakon.htm You can join the speakon user group by sending a blank e-mail to: speakon-subscribe@xxxxxxxxxxxxxxx ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq