Right, great!:) It's now on our "list of wants for both"!:) Thanks for bearing with my questions!:) Carol P ----- Original Message ----- From: Steve Nutt <steve@xxxxxxxxxxxxxx> To: access-uk@xxxxxxxxxxxxx CC: Date: Sunday, 24 August 2014 11.24 am Subject: [access-uk] Re: true call remote/pre configuration > > > Hi Carol, > > The official answer from Mr Truecall is that no more RENS are added to the > load. In other words, if you plug the phone into the back of trueCall, then > the same REN is used. > > All the best > > Steve > > -- > Computer Room Services > 77 Exeter Close > Stevenage > Hertfordshire > SG1 4PW > Tel: 644(0(1438-742286 > Mob: 644(0(7956-334938 > Fax: 644(0(1438-759589 > Email: steve@xxxxxxxxxxxxxx > Web: http://www.comproom.co.uk > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of > ,c;arol.,p;earson29@xxxxxxxxxxxxxx > Sent: 22 August 2014 16.59 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: true call remote/pre configuration > > I was thinking though about the amount of rems you're allowed, so 3 phones > plus Truecall may be over the 4, if Truecall needs more than 1. > > Carol P > > ----- Original Message ----- > From: ";Steve Nutt" <steve@xxxxxxxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Friday, August 22, 2014 11.37 AM > Subject: [access-uk] Re: true call remote/pre configuration > > > Hi, > > Again, plug Truecall into the master socket and use a double adapter. Or > plug the phone into the back of Truecall. > > All the best > > Steve > > -- > Computer Room Services > 77 Exeter Close > Stevenage > Hertfordshire > SG1 4PW > Tel: 644(0(1438-742286 > Mob: 644(0(7956-334938 > Fax: 644(0(1438-759589 > Email: steve@xxxxxxxxxxxxxx > Web: http://www.comproom.co.uk > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf > Of > Peter Beasley > Sent: 22 August 2014 11.07 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: true call remote/pre configuration > > Howab my situation where I have an extention wired directly into the > master socket. The master socket is by the window in the living room and > the > > extention runs into the bedroom where my computer is. > ----- Original Message ----- > From: ";Steve Nutt" <steve@xxxxxxxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Friday, August 22, 2014 10.46 AM > Subject: [access-uk] Re: true call remote/pre configuration > > 0was Hi Pele, 0was 0was Yes. If you plug trueCall into the master socket in the house, then all 0was phones are covered. 0was 0was All the best 0was 0was Steve 0was -- 0was Computer Room Services 0was 77 Exeter Close 0was Stevenage 0was Hertfordshire 0was SG1 4PW 0was Tel: 644(0(1438-742286 0was Mob: 644(0(7956-334938 0was Fax: 644(0(1438-759589 0was Email: steve@xxxxxxxxxxxxxx 0was Web: http://www.comproom.co.uk 0was 0was -----Original Message----- 0was From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf 0was Of 0was Pele West 0was Sent: 22 August 2014 09.04 0was To: access-uk@xxxxxxxxxxxxx 0was Subject: [access-uk] Re: true call remote/pre configuration 0was 0was Hi Steve 0was 0was If you plug the base station for the cordless phones into Truecall, does 0was this mean that other landline phones in the house are not covered? If so, 0was is there a way for all phones to be connected? Would it be possible to 0was plug Truecall into the master socket in the house? 0was 0was Pele West 0was ** To leave the list, click on the immediately-following link:- 0was ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] 0was ** If this link doesn't work then send a message to: 0was ** access-uk-request@xxxxxxxxxxxxx 0was ** and in the Subject line type 0was ** unsubscribe 0was ** For other list commands such as vacation mode, click on the 0was ** immediately-following link:- 0was ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] 0was ** or send a message, to 0was ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq 0was 0was 0was 0was ** To leave the list, click on the immediately-following link:- 0was ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] 0was ** If this link doesn't work then send a message to: 0was ** access-uk-request@xxxxxxxxxxxxx 0was ** and in the Subject line type 0was ** unsubscribe 0was ** For other list commands such as vacation mode, click on the 0was ** immediately-following link:- 0was ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] 0was ** or send a message, to 0was ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq 0was > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > x ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq