[access-uk] Re: USB hub speeds
- From: "Mark Threadgold" <m.j.threadgold@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 30 May 2014 07:10:40 +0100
Ibrahim,
Just what I wanted to hear, many thanks!
Mark Threadgold
Of all the things I have ever lost, the one I miss most is my mind...
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ibrahim Gucukoglu
Sent: 30 May 2014 01:00
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: USB hub speeds
Hi Mark.
In short, no, if you use a USB 2 device with your USB 3 hub, you will not
limit the capabilities of your hub when used with other USB 3 devices.
All the best, Ibrahim.
-----Original Message-----
From: Mark Threadgold
Sent: Thursday, May 29, 2014 11:29 PM
To: AccessUK List
Subject: [access-uk] USB hub speeds
Hi all.
If a USB 3.0 hub has a USB 2 device plugged into it, will this limit the
data transfer speed of the entire hub to USB 2 speed, or will it still allow
the USB 3.0 devices to work at their correct speed and only slow the data
for the USB 2 device?
If it limits the speed of the entire hub I would be better off putting in a
USB 2 hub for those rated devices to keep the USB 3.0 devices all working
properly.
Cheers,
Mark Threadgold
Of all the things I have ever lost, the one I miss most is my mind...
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
