[access-uk] Re: Snall footprint nono laser printer

Hi Philip, details below:

Deon
"Hi David,

You could do a lot worse than look at the HP Laserjet 1022 range.  You can

buy the 1022N, which is a Network as well as a USB printer, or the 1022NW,

which will work over a Wifi network, a regular network, and a USB port.  It

is not a colour printer, but it is small, and will hold 250 sheets.  It

prints at about 18 pages per minute, which is pretty fast too.

Can't remember where we bought it, but check it out on the HP site.

All the best

Steve"
At 14:14 09/08/2007, you wrote:
Hi,
Recently Steve Nutt provided details of above. At the tine I was not in the market for a new printer, but I an now. Could someone provide make and type no.

Many thanks
Philip
----- Original Message ----- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, August 09, 2007 1:11 PM
Subject: [access-uk] Re: setting up automatic defragmentation in disk keeper was Re: Re: computer housekeeping


Hi Wendy,

That's a bit vague.  It seems to work OK for me with JAWS.  If not though,
why not employ your JAWS cursor and look around the dialog?  Remember the
JAWS cursor is your friend in these situations.  If you then come across a
checkbox and you want to change its state, you can just left click it.

All the best

Steve

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Wendy Sharpe
Sent: 09 August 2007 11:56
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: setting up automatic defragmentation in disk keeper
was Re: Re: computer housekeeping

Steve

I am using JAWS, and it doesn't seem to work very well with Diskeeper.  I
have tried doing what you say below, but it doesn't just say enabled or
disabled, it sends you into a dialog.  Whatever I do, both parts of my disk
seem to keep saying disabled several times.  The checkbox for auto defrag
seems ok, but I am not sure whether auto defrag is really on or not.

Wendy

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Steve Nutt
Sent: 09 August 2007 08:57
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: setting up automatic defragmentation in disk keeper
was Re: Re: computer housekeeping

Hi Alex,

Go into Diskeeper from your program group, press tab once, go to the drive
which you want to check, right click it or press the application key, and
then arrow down.  It should say Automatic defrag enabled.

All the best

Steve

-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Alexander Shannon
Sent: 08 August 2007 12:48
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: setting up automatic defragmentation in disk keeper
was Re: Re: computer housekeeping

Hi Steve,

I believe I said yes to automatic defragmentation, but how can I check this
please.


Alexander Shannon

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


----------------------------------------------------
This message has been processed by Firetrust Benign.


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: