Hi John, Thanks for the info; do you repeat the same 10 digits (are they hex or ASCII?) in each of the 4 boxes? I thought you could choose either of the 4 boxes, no. 1 being the default. Cheers, Mike -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John Gallagher Sent: 11 January 2007 19:10 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Securing a home wireless network Hi list Mike I have just done this not sure if you have my phone number. in my case in the four edit boxes you put in a number. if it is 64 bit it is a ten digit number. I checked the box I used then on my laptop and pk I put in the same number. the first time it took a couple of minutes to get on to the network. At 14:19 11/01/2007, you wrote: >Hi listers, > >I've tried securing my home wireless network via my router using wpa >key, but succeeded in securing myself from the network as well, so had >to reset the router. > >All help welcomed with thanks, > >Mike > >** To leave the list, click on the immediately-following link:- >** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >** If this link doesn't work then send a message to: >** access-uk-request@xxxxxxxxxxxxx >** and in the Subject line type >** unsubscribe >** For other list commands such as vacation mode, click on the >** immediately-following link:- >** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >** or send a message, to >** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq