[access-uk] Re: Problems adding feeds to Accessible RSS Reader
- From: "Sunil" <bosley20@xxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 24 Aug 2005 23:05:13 +0100
George, do you mean the Independent have buried their heads in the sand or
the developers of the accessible RSS reader? What is the net framework
software and why am I unable to access rss feeds without it? Is it really
such a crucial piece of software? Please explain!...cheers
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
George Bell
Sent: 24 August 2005 22:07
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Problems adding feeds to Accessible RSS Reader
Hi Sunil,
> I'd be interested to know why the feed from the
Independent newspaper is 'faulty' according to the
accessible feedreader.
Probably because like many, they have buried their heads in
the .net sand and ignored progress - if "progress" is the
right word.
George.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Douglas
Harrison
Sent: 24 August 2005 19:42
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Problems adding feeds to Accessible RSS Reader
Sunil,
I have experienced a similar problem with other feeds and
that was one reason why I was looking for an alternative - until the Net
Framework 1.1 issue arose.
I have just looked at
http://www.webbie.org.uk/accessiblerss/index.htm
and read the following -
"You are likely to find that some feeds don't work. This
may be because the feed is not valid. You can check the
feeds validity at The Feed Validator Service (link)."
I don't know quite how to interpret that.
I suggest that you report any feeds that don't work with Accessible RSS but
do work on other aggregators. Feedback is welcomed but I have to admit that
reports of bugs and suggestions for improvement seem to wait some time
before they are taken into account.
Douglas
On 24 Aug 2005 at 18:16, Sunil wrote:
> I've installed 1.7 of the software and have added several
feeds. I
> just tried to add the feed for the Independent's Media
stories and got
> a message saying something along the lines of the feed
couldn't be
> added because it was bad or faulty. I know its not though
because I
> added it to a different aggregator last night, same thing
happened
> when I tried to add a feed from the New Statesman too. Can
any
> Accessible RSS users explain what the problem might be?
>
>
--
Douglas Harrison
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
