[access-uk] Re: Editing the JFW.INI file for ex sound card
- From: "Chris Hallsworth" <christopherh40@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 12 Nov 2009 22:18:59 -0000
You change the sound card through the sound cards choice, under the JAWS
utilities menu. Jfw.ini is no longer required to change this setting
manually. Hope this helps.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andy
Sent: 06 November 2009 11:35 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Editing the JFW.INI file for ex sound card
Hi all.
I'm wanting JAWS to run through my Intel(r) Integrated Audio, on-board sound
card, whilst directing all other audio to my Creative Labs 24 bit
Soundblaster card.
I've edited the JFW.INI file as below. My edition is in adding the middle
line:
Synth1LongName=Eloquence Software
synth1port=Intel(r) Integrated Audio
Synth1Driver=eloq
When I re-boot the XP Home computer with JAWS 11, all audio content is
coming through the Soundblaster card.
My thinking is that either I've done something wrong, or version 11 will not
allow me to run two sound cards.
Any advice would be very much welcomed.
Very best wishes.
Andy.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
