[access-uk] Re: Braille text phone
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 27 May 2007 10:12:22 +0100
Hi Derek,
I don't believe there is a driver for the Pacmate for either Talks or Mobile
Speak. They support the Humanware and handytech displays as far as I am
aware.
All the best
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Derek Hornby
Sent: 26 May 2007 18:58
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Braille text phone
Hi Steve
>Just to inform you that both Mobile Speak and Talks also do Braille,
right ok but would it work with Pacmate?
Some background to my problem:
I am using a Versa Braille as a Braille textphone. However, this kit is
more than 20 years old and is on its last feet!
Blazie Engineering say that depending on the reason for a repair, it is
now very likely that if the kit fails, that's it, finished!
They did &2 years ago) suggest Pacmate as the replacement.
But then said there are problems with Pacmate connecting to the telephone
system in UK First they said grade 2 Braille wasn't supported, and when I
pointed out that didn't matter they then said there are other technical
problems but didn't say what they are.
I have since turned to Sight & Sound and they seem more helpful because
they have been discussing issues with BT's Textdirect manager.
Regards,
Derek
e-mail: derek.hornby_uk@xxxxxxxxxxxxxxx
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
