Jackie, My initial thought is that if the pressure goes down enough then the boiler will stop working. When and if this happens, if you know what to do to the valve when the pressure is down, you could try that. If it works then you have solved the problem, if it doesn't, you need an Engineer, and if it blows up, this was not my idea. David -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx]On Behalf Of Jackie Cairns Sent: 20 June 2009 14:13 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Accessible household appliances Following a recent thread on the Cobolt combination oven, I am prompted to raise a question about the accessibility of comby boilers. I have just moved into a spanking new flat which I rent. All the kitchen appliances are built-in. So far, I have not needed to mark either the washing-machine/dryer or the cooker. I can remember how many clicks to turn the dial for various programs on the machine, and count the number of presses for timing a drying session. On the cooker, the hob is gas, but the oven is electric. However, I've also sussed it out, and use it confidently. Indeed, the only talking appliance I have in my kitchen is the Cobolt microwave which I've had for a while. My only concern, however, is not being able to access the boiler. This is a Glowworm digital comby affair. I've had someone set the time on it for me, and have the thermostat in the hall set to control the temperature. But my concern is that I won't know if the water pressure goes too low, where warning signs then flash up on the screen. I had been in my flat a few days when the water suddenly went cold, and I had to call out a plumber, much to the disgust of the landlord. The plumber said that it is easy to open the valve on the boiler to top up the pressure, but of course it is if you can see!! I can tell you he and I didn't see eye to eye over that one (smile). Telling me to do something that's simple if you have sight isn't helpful or funny in my book!! Does anyone know of a device or method that indicates when the pressure is going low? My energy supplier isn't British Gas, and bear in mind that this is a private rent, so my landlord isn't going to be receptive to lots of adaptions. Fortunately, I don't need alterations to anything in the main, and I manage quite independently on my own with my own methods and memory. But the boiler does worry me as I have absolutely no control over the screen, controls or timer. Apparently, from what I've been told, you only know when the pressure is going low if a warning message or code flashes up on the digital screen, you can't anticipate it until the message appears. Any suggestions or thoughts appreciated please. Jackie Cairns Braille Specialist Email: Jackie.Cairns@xxxxxxxxxxxxxxxxxxx Sight and Sound Technology Ltd Welton House North Wing Summerhouse Road Moulton Park Northampton NN3 6WD Telephone: 01604 798024 Fax: 01604 798090 Web: www.sightandsound.co.uk ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq __________ Information from ESET Smart Security, version of virus signature database 4173 (20090620) __________ The message was checked by ESET Smart Security. http://www.eset.com ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq