Qui indica i vari formati gestibili:
<http://info-coach.fr/atari/software/FD-Soft.php>
http://info-coach.fr/atari/software/FD-Soft.php
E spiega bene i vari modi compatibili:
* <http://info-coach.fr/atari/software/FD-Soft.php#fd_soft_dd_formats> Atari
/ PC / ISO DD Formats
* <http://info-coach.fr/atari/software/FD-Soft.php#fd_soft_atari_dd_format>
Atari Standard Double Density Format
*
<http://info-coach.fr/atari/software/FD-Soft.php#fd_soft_standard_512B_formats>
Standard 9-10-11 Sectors of 512 Bytes Format
*
<http://info-coach.fr/atari/software/FD-Soft.php#fd_soft_standard_format_bytes_other>
Standards 128-256-512-1024 Bytes / Sector Format
Ed indica anche le differenze tra come il TOS gestisce il format rispetto allo
standard IBM di allora:
The Atari ST uses the Western Digital
<http://info-coach.fr/atari/hardware/FD-Hard.php#WD1772> WD1772 Floppy Disc
Controller (FDC) to access the 3 1/2 inch (or to be more precise 90mm) floppy
disks. Western Digital was recommending to use the IBM 3740 Format for Single
Density diskette and to use the
<http://info-coach.fr/atari/software/_fd-soft/ibm-fmt.gif> IBM System 34 Format
for Double Density diskette. Actually the default Atari Format used by the TOS
is slightly different (nearer to the
<http://info-coach.fr/atari/software/_fd-soft/iso-fmt.gif> ISO Double Density
Format) as it does not have an IAM byte (and associated GAP), before the first
IDAM sector of the track (see diagram below).
However the WD1772 ( and therefore the Atari) is capable to read both format
without problem but the reverse is usually not true (i.e. floppies formatted on
early Atari machines can't be read on PCs but floppies created on PC can be
read on Atari).
Non ricordo solo quanto formattava esattamente il TOS in singola e doppia
faccia ma penso sia molto vicino ai 720kb standard di MS-DOS.
Solo che praticamente nessuno usava il format Standard perché era troppo
scarso, fin dai primi tempi si usavano utility per formattare i floppy oltre
800kb ed a 10 o 11 settori.
Per cui era tutto molto variabile.
Ho fatto ora il test in TOS con l’emualatore ed il formato standard a Doppia
Faccia è di:
726.000 bytes.
Comunque farò una prova per curiosità ma sicuramente non andrà bene Floppy
Image e soprattutto un floppy USB.
Kora Sistemi Informatici
Via Cavour 1, 46030 San Giorgio di Mantova MN
Tel/Fax +39 0376 371059
P. IVA: 02048930206
Da: zxspectrum-bounce@xxxxxxxxxxxxx [mailto:zxspectrum-bounce@xxxxxxxxxxxxx] ;
Per conto di Massimo Raffaele
Inviato: sabato 4 marzo 2017 11:36
A: zxspectrum@xxxxxxxxxxxxx
Oggetto: [zxspectrum] Re: R: Re: R: Re: R: Re: R: R: Re: R: Re: R: Re: Alla
facciazza! Sid player x AY!!!
Il giorno 4 marzo 2017 11:05, Simone Voltolini <simone.voltolini@xxxxxx
<mailto:simone.voltolini@xxxxxx> > ha scritto:
Ad ogni modo mi hai fatto incuriosire ed appena passo da casa mi prendo su
alcuni floppy protetti (che ancora ho) e li testo.
Sì ma quelli non potrai assolutamente copiarli con Floppy Image.
Solo quelli non protetti, da 360KB/720KB.
Però probabilmente quelli riesci a farli con FloImg (in floppy drive non-USB) o
SAMdisk.
Solo che poi... come li testi? :-)
Max