Non posso provare in questo momento, ma il manuale di MakeTZX dice: *Control keys* *To pause the recording,* press 'p' at any time followed by any other key to resume. During pause, the vu-meters are shown again. The recording can be stopped in manual or automatic mode. *To halt the conversion manually*, simply press any key (but 'p') at any time. *For automatic mode,* instead, set a *preprogrammed recording* specifying the exact duration of the process with shifted switch 't' as said above; for example, to record for 5 minutes and 30 seconds enter "-rt5:30" and after that amount of time has elapsed MakeTZX will automatically stop. Of course you can still halt operation manually at any time also during a preprogrammed recording. Quindi sembrerebbe che basti premere un tasto qualunque che non sia "p". E' così? Il giorno 25 settembre 2014 12:11, Enrico Maria Giordano < e.m.giordano@xxxxxxxxxxxxxxx> ha scritto: > Un aiuto urgente. Sto provando ad utilizzare MakeTZX. Sono arrivato > all'ultimo blocco del nastro e MakeTZX sta aspettando con il messaggio > "Finding pause...". Che faccio? Lo interrompo con CTRL-C? > > Help! > > EMG > > -- > EMAG Software Homepage: http://www.emagsoftware.it > The EMG Music page: http://www.emagsoftware.it/emgmusic > The EMG's ZX-Spectrum Page: http://www.emagsoftware.it/spectrum > The Best of Spectrum Games: http://www.emagsoftware.it/tbosg > >