[windows2000] Re: rackmount servers

  • From: "Dennis Appelboom" <dennis.appelboom@xxxxxxxxxx>
  • To: <windows2000@xxxxxxxxxxxxx>
  • Date: Thu, 5 Sep 2002 15:06:41 +0200

Well, I had a problem with a Intel dual-NIC card.
When installed with windows 2000 (pro), I only used one off the two =
NIC's.=20
I was able to add the machine too the domain, but when I wanted too use =
the internet explorer, I wasn't able to. I do use Internet Connection =
Sharing for that......

I was able to solve that problem by disabling the unused second NIC.
Important notice: During the installation, I was asked to configure the =
NIC #2 first, and then NIC #1.=20
I guess that Windows was trying to access the internet through the =
deafult NIC (which is the first one installed.....in my case NIC #2), =
while I used The NIC #1.....

But other than this problem, everything works fine.

Kind Regards,=20
Dennis Appelboom
________________________________=20
marviQ=20
Archangelkade 1-3=20
1013 BE Amsterdam=20
Tel: +31 (0) 20 410 7000=20
Fax: +31 (0) 20 410 7103=20
Dir: +31 (0) 20 410 7015=20
E-mail: dennis.appelboom@xxxxxxxxxx=20


-----Oorspronkelijk bericht-----
Van: Condon, Mike [mailto:M1C@xxxxxxxxxxxxxxxxx]
Verzonden: donderdag 5 september 2002 14:51
Aan: 'windows2000@xxxxxxxxxxxxx'
Onderwerp: [windows2000] Re: rackmount servers



Is there a problem with dual nic's & Windows 2000? One of my tech guys
referred to some MS tech notes and disabled the 2nd nic's on all of our =
HP
dual nic LPR2000's.=20

-----Original Message-----
From: Greg Reese [mailto:GReese@xxxxxxxxxxxxxxxx]
Sent: Wednesday, September 04, 2002 3:15 PM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] Re: rackmount servers



I have a few of the IBM XSeries 330 models in my rack and they have been =
=3D
great so far.  The have a nice cabling scheme where you can daisy chain =
=3D
them together for keyboard, mouse, and video.  Kind of like having a =3D
built in KVM switch.   They also have dual nics capable of being teamed =
=3D
together for added throughput. You have to have a Cisco switch capable =
=3D
of FEC to get the best performance though.

Greg

-----Original Message-----
From: slymax [mailto:groups@xxxxxxxxxx]
Sent: Wednesday, September 04, 2002 1:40 PM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] rackmount servers


I'm looking into some low-end rackmountable servers for my company.
I've checked out Dell, IBM, and HP.  Does anyone have any
recommendations or favorites?

Thanks,
___________________
Steve H
http://vette.slymax.com




=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/win2000list.cfm

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/win2000list.cfm

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/win2000list.cfm

==================================
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/win2000list.cfm

Other related posts: