[windows2000] Trace route

  • From: "Costanzo, Ray" <rcostanzo@xxxxxxxxxxx>
  • To: <windows2000@xxxxxxxxxxxxx>
  • Date: Wed, 22 Jan 2003 08:37:28 -0500

Hi list,

No one where I work can answer this, so maybe someone here will know
why.  Any time I do a trace route to a remote destination somewhere, say
to microsoft.com, it is only two hops.  One from my computer to our
router on our network that is connected to the rest of the world, and
then from the router to the destination.  So, let's say my computer's IP
is, and our Internet-connected router (my gateway) is, this is what all my tracerts look like:

Tracing route to xx.xx.xx.xx
over a maximum of 30 hops:

  1    <1 ms    <1 ms    <1 ms
  2   153 ms    83 ms    83 ms  xx.xx.xx.xx

Trace complete.

Can anyone explain to me why I don't see any other hops that I would see
if I did this from home (where I use a dsl router) or if I were using a
dial-up connection?  Just curious.


Ray at work

This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.


This Week's Sponsor: RTO Software - TScale
TScale increases Terminal Server capacity. Get 30-40% more users per
server to save $$$ and time. Add users now! - Not more servers.
If you?re using Citrix, you must learn about TScale!  
Free 30-day eval: http://www.rtosoft.com/Enter.asp?ID=80

To Unsubscribe, set digest or vacation
mode or view archives use the below link.


Other related posts: