Thanks ________________________________ From: windows2000-bounce@xxxxxxxxxxxxx [mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Leitman, Ken Sent: Monday, July 03, 2006 9:14 AM To: windows2000@xxxxxxxxxxxxx Subject: [windows2000] Re: NIC TEAMING We switched to SFT recently as IBM servers have an issue with AFT. The HP server work fine with both and we have been using AFT on HP for almost 6 years. Ken Leitman http://winteldirections.blogspot.com/ ________________________________ From: windows2000-bounce@xxxxxxxxxxxxx [mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Sent: Sunday, July 02, 2006 12:04 PM To: windows2000@xxxxxxxxxxxxx Subject: [windows2000] Re: NIC TEAMING Works well, I have been using Proset for about a year in the Fault tolerance configuration with no issue's. Gary -----Original Message----- From: windows2000-bounce@xxxxxxxxxxxxx [mailto:windows2000-bounce@xxxxxxxxxxxxx]On Behalf Of Beckett, William (Bill) Sent: Sunday, July 02, 2006 8:14 AM To: windows2000@xxxxxxxxxxxxx Subject: [windows2000] NIC TEAMING Is anyone out there using the NIC teaming feature, specifically with Intel Proset? If so, which setup are you using (ALB, SLA,AFT, etc) and have you encountered any issues? ----------------------------------------- The information contained in this transmission may be privileged and confidential and is intended only for the use of the person(s) named above. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender immediately by reply e-mail and destroy all copies of the original message. Please note that we do not accept account orders and/or instructions by e-mail, and therefore will not be responsible for carrying out such orders and/or instructions. If you, as the intended recipient of this message, the purpose of which is to inform and update our clients, prospects and consultants of developments relating to our services and products, would not like to receive further e-mail correspondence from the sender, please "reply" to the sender indicating your wishes. In the U.S.: 1345 Avenue of the Americas, New York, NY 10105.