Re: help help help with streams
- From: "Marty Rimpau" <mrimpau@xxxxxxxxxxxxxx>
- To: "winamp4theblind@xxxxxxxxxxxxx" <winamp4theblind@xxxxxxxxxxxxx>
- Date: Wed, 02 Jun 2004 00:20:25 -0700
Hi, Chris, then how would you stop all the filters and stuff from going
out over the air from your email? I may just do it the way you and Bob
have outlined, but I can't figure out, and maybe I'm doing something
incorrectly, but why the linerec won't work, even though it shows up in
the title bar as being on. Another thing Jonathan, to my knowledge
didn't talk about, was this, and that is, once you've selected the
shoutcast plugin to be second in command, once you select the sqr cross
fader, the shoutcast plugin is automatically selected, even though no
dsp plugins are selected, so I don't know how this happened. I may try
it with the what you hear option selected, but how will I know what is
loud enough, or do I just experiment, or what? This last test, I did
with the firewall disabled, as I didn't know if that may have been a
contributing factor, but I doubt it.
On Wed, 02 Jun 2004 01:36:14 -0500, Chris Skarstad wrote:
>Hi Marty. Ok, i'll tell you exactly how I do it so you can see. Remember
>Marty, just because Jonathan said something in his tutorial, it doesn't
>mean that it's always true for every instance.
>How I do it is I use one instance of Winamp with the SQR cross fader as my
>output plugin using the radio preset.
>I do not have the shoutcast plugin as the second level dsp plugin in the
>sqr crossfader configuration screens, so if you wanna do it like me, don't
>even worry about that. Instead, go into your Shoutcast plugin and make
>sure that the advanced controls are enabled. It really is ok to do
>this. But remember if you do this, then you must have the what you hear
>option turned on in the recording controls portion of the windows volume
>control. If you don't have the what you hear option then of course this
>method isn't going to work. But for what you want this will be fine. For
>compression I use Audiostocker.
>For the type of music I play, i've found that having medium compression
>sounds the best and the max eq isset tothe medium setting as well.
>Basically, you want everything going to your sound card to go out over the
>air, so if you want nice cross fades andgood compression, that's a good way
>to go. I am sure other broadcasters can add to this or correct me if I'm
>wrong. but remember, there are many different ways to do this, so you just
>have to find the way that best works for yo and the one that is easiest for
>your system.
>
>
>
>
>At 12:08 AM 6/2/2004, you wrote:
>>Hello, somebody please help me with streaming, as I want to start
>>streaming again, but I want to start at an elementary level. I know
>>Bob Kanish posted instructions on using the what you hear option, but
>>Jonathan says, in his main menu tutorials, that you don't have to use
>>what you hear if the advanced controls are disabled. I can connect,
>>but here's what I want to do. I want to use the shoutcast and audio
>>stocker plug-in, and before I even turned anything on, I went to the
>>dsp portion of the sqr cross fader, and told it to make the shoutcast
>>plug-in second in command, and the second list box has the audio
>>stocker shoutcastmuxer.dll as the second in command, but maybe I had
>>things turned on at the wrong time, because, every time I try to
>>stream, I can connect, but when I start to play a file, or, if I have
>>selected linerec as the first thing in the playlist, and press the b
>>key, these are the errors I get, and I don't know what is causing this,
>>because I have the radio pree-sets sounding good in the sqr cross
>>fader, but why can I not stream? Now, I don't have a test service, so,
>>I have to use the shoutcast server, and I have it in mono at 24 kbps at
>>22050 hertz mono, which is the default, and I have 350 kb going up,
>>according to mind spring, but I must be doing something wrong, for when
>>ever I either play an mp3, or, press the b key, to go to the next thing
>>in the playlist, if I've selected linerec first, I get these errors,
>>and I feel like I need some help, because I want my listeners to hear
>>the segways I do, but don't know why this isn't working, with winamp
>>2.92, 192 megs of ram, a 400 megs processor, the shoutcast 1.80 dsp
>>plug-in, and in the shoutcast server.ini file, I just have it set, to
>>max listeners ten, and my pass word checks out fine, and I have it on
>>port 8000, and kerio doesn't seem to be giving me any problems, it's
>>just when I play a file, it does this, and here are the errors from the
>>defaultlog.txt log. If necessary, I'd be willing to speak with
>>somebody on the phone, and pay for the call, but the first time, I was
>>confused, because, there was more than one thing in the system tray,
>>but that's because I'm running the shoutcast server, and I don't have
>>an updater client, so, I have to go to the web site, to update my ip
>>address each time, but it's good now, so, here are these errors, I feel
>>like I need some help, and it is this type of thing that caused me to
>>be discouraged, and give up.
>>**********************************************************************
>>Date 06/01/2004 Time 21:39
>>WINAMP caused an invalid page fault in
>>module DSP_SC.DLL at 017f:01201fa5.
>>Registers:
>>EAX=fffff780 CS=017f EIP=01201fa5 EFLGS=00210212
>>EBX=00000000 SS=0187 ESP=0210d740 EBP=01396654
>>ECX=3fffe160 DS=0187 ESI=01420000 FS=6027
>>EDX=00000227 ES=0187 EDI=0141e000 GS=0000
>>Bytes at CS:EIP:
>>f3 a5 8b c8 8b 44 24 10 83 e1 03 f3 a4 8b 15 f8
>>Stack dump:
>>01943010 019430d4 00000002 0000ac44 00000480 00000000 000001e3 ffffff32
>>00002000 ffffff54 fffffe5f ffffff22 fffffe11 fffffef5 fffffdf5 ffffff0f
>>
>>**********************************************************************
>>Date 06/01/2004 Time 21:39
>>WINAMP caused an invalid page fault in
>>module KERNEL32.DLL at 017f:bff8ac13.
>>Registers:
>>EAX=00000000 CS=017f EIP=bff8ac13 EFLGS=00200246
>>EBX=00000000 SS=0187 ESP=02b5fd28 EBP=bff92d08
>>ECX=02b5ffbc DS=0187 ESI=0141afe0 FS=616f
>>EDX=0000004c ES=0187 EDI=bfdf4cb8 GS=0000
>>Bytes at CS:EIP:
>>a1 10 9d fc bf 50 e8 96 95 fe ff ff 76 04 e8 35
>>Stack dump:
>>bfdf5ce2 012013b0 0141afe0 011ebef0 00000004 00000004 01201949 011ebef0
>>00000004 00000004 00000000 02b5ff28 02b5fe34 02b5fdf0 02b5ff28 bff76855
>>
>>could somebody please help me, because maybe I'm doing something wrong,
>>but don't know what.
>>
>>Marty
>>
>>
>>To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>>
>> To unsubscribe from this mailing list, please send a message to:
>>winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the
>>subject line.
>> Archives located at:
>>//www.freelists.org/archives/winamp4theblind>
>> If you have any concerns about the list, post received from the list, or
>>the way the list is being run, do not post them to the list directly.
>>Instead, please contact
>>the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>
>
>To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>
> To unsubscribe from this mailing list, please send a message to:
>winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>line.
> Archives located at:
>//www.freelists.org/archives/winamp4theblind>
> If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list directly. Instead,
>please contact
>the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>
Marty
To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
To unsubscribe from this mailing list, please send a message to:
winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
Archives located at:
//www.freelists.org/archives/winamp4theblind>
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list directly. Instead,
please contact
the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
Other related posts:
