Re: Smoothing play list
- From: "Marty Rimpau" <mrimpau@xxxxxxxxxxxxxx>
- To: "winamp4theblind@xxxxxxxxxxxxx" <winamp4theblind@xxxxxxxxxxxxx>
- Date: Thu, 05 Aug 2004 02:44:56 -0700
Hi, Brad, don't know the answer to that one.
On Thu, 05 Aug 2004 02:07:43 -0500, Brad Dunse wrote:
>Marty,
>
>I needed to reload the WAV plug in to get the separation of Jaws and music
>volumes. Is there a way to do this sepearation with the SQR plugin?
>
>Thanks.
>Brad
>
>
>Marty Rimpau wrote:
>>Hi, Brad, just choose the sqr cross fader from the output plugins
>>section, and then tab to the configure button, and press the space bar,
>>but this tab control is querky, so you get around this by tabbing to
>>the close button, after pressing the configure button with the space
>>bar, and press the up arrow, which will bring the tab control in focus,
>>and there should be 11 tabs in there. First, right arrow to the
>>presets tab, and from the list that you tab to, arrow down to radio,
>>tab to the load button, and press the space bar, and then go to the
>>bottom of the screen, to find the close button, and left click that to
>>get out of there, but there's some setting up to do, so, after the tab
>>control has reappeared, then find the cross fading tab, and there's a
>>check box that should be checked, which says analyze when signal falls
>>to and if you tab, that combo box should be on either negative six or,
>>negative nine, I've seen it in both places, but move it down to
>>negative fifteen, then tab to the close button, and press the up arrow
>>to regain focus on the tab control, and right arrow to the fade on stop
>>skip tab, and check the check box that says flush the buffer, or
>>something like that, so that when you have the cross fader enabled with
>>the radio presets, when using the b and z keys to move through
>>selections, you can do so quicker this way. Then find the close
>>button, and up arrow once again to gain focus on the tab control, and
>>right arrow to the advanced tab, and in there, uncheck the box that
>>says truncate tracks longer than, and then, you can tab to the close
>>button, and press the space bar, to get out of there, and then the
>>close button, or escape to get out of the preferences dialog.
>>Hopefully, after these settings, songs will go right from one to
>>another like a radio station, but it isn't as good as ots juke, but
>>that's another program, and winamp is darn close in that regard. Hope
>>these instructions help you.
>>On Thu, 05 Aug 2004 00:46:23 -0500, Brad Dunse wrote:
>> >Marty,
>> >
>> >Well I now have downloaded the crossfade plug-in off the WinAmp4TheBlind
>> >site which is fading them out. But now there is too much time between. I
>> >think I can play with it to get it right, but I have no clue where to find
>> >the settings for the crossfader. It's not showing up on the desktop or in
>> >program files. Where might I find it's settings?
>> >
>> >Marty Rimpau wrote:
>> >>Hi, Brad, are you using the sqr cross fader? If so, the only thing I
>> >>can think of is that the truncate tracks longer than check box is
>> >>checked in the advanced tab of configuration, if not, somebody else
>> >>will have to offer a solution.
>> >>On Wed, 04 Aug 2004 22:30:11 -0500, Brad Dunse wrote:
>> >> >OK. I've created a play list. But I've noticed between songs
>> it truncates
>> >> >the song it is on as it goes into the next one. Is there a way to allow
>> >> >proper buffering or smoothing out of the files? Either a fade out or a
>> >> >proper distance from song to song to allow one to finish? Thanks for all
>> >> >the help. I hate to be asking so many questions.
>> >> >
>> >> >Brad
>> >> >
>> >> >
>> >> >To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>> >> >
>> >> > To unsubscribe from this mailing list, please send a message to:
>> >> >winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the
>> >> subject line.
>> >> > Archives located at:
>> >> >//www.freelists.org/archives/winamp4theblind>
>> >> > If you have any concerns about the list, post received from the list, or
>> >> >the way the list is being run, do not post them to the list directly.
>> >> Instead, please contact
>> >> >the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>> >> >
>> >>
>> >>Marty
>> >>
>> >>
>> >>
>> >>To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>> >>
>> >> To unsubscribe from this mailing list, please send a message to:
>> >>winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the
>> >>subject line.
>> >> Archives located at:
>> >>//www.freelists.org/archives/winamp4theblind>
>> >> If you have any concerns about the list, post received from the list, or
>> >>the way the list is being run, do not post them to the list directly.
>> >>Instead, please contact
>> >>the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>> >
>> >Brad
>> >
>> > Never give the devil a ride, he will always want to drive
>> >
>> >
>> >
>> >To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>> >
>> > To unsubscribe from this mailing list, please send a message to:
>> >winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the
>> subject line.
>> > Archives located at:
>> >//www.freelists.org/archives/winamp4theblind>
>> > If you have any concerns about the list, post received from the list, or
>> >the way the list is being run, do not post them to the list directly.
>> Instead, please contact
>> >the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>> >
>>
>>Marty
>>
>>
>>
>>To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>>
>> To unsubscribe from this mailing list, please send a message to:
>>winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the
>>subject line.
>> Archives located at:
>>//www.freelists.org/archives/winamp4theblind>
>> If you have any concerns about the list, post received from the list, or
>>the way the list is being run, do not post them to the list directly.
>>Instead, please contact
>>the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>
>Brad
>
> Be ye fishers of men, you catch them & He'll clean them
>
>
>
>To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
>
> To unsubscribe from this mailing list, please send a message to:
>winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
>line.
> Archives located at:
>//www.freelists.org/archives/winamp4theblind>
> If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list directly. Instead,
>please contact
>the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
>
Marty
To post a message to the list, send it to winamp4theblind@xxxxxxxxxxxxxx
To unsubscribe from this mailing list, please send a message to:
winamp4theblind-request@xxxxxxxxxxxxx with the word unsubscribe in the subject
line.
Archives located at:
//www.freelists.org/archives/winamp4theblind>
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list directly. Instead,
please contact
the list owners at winamp4theblind-admins@xxxxxxxxxxxxxx
Other related posts:
