[wdmaudiodev] Re: Writing LFX APO and issues with .INF file
- From: "Sam Tertzakian" <sam@xxxxxxxxxxx>
- To: <wdmaudiodev@xxxxxxxxxxxxx>
- Date: Wed, 5 Aug 2009 10:12:24 -0700
To debug with VS, you should go to the Tools | Options | Debugging | Symbols
window. There you can put:
http://msdl.microsoft.com/download/symbols
Then, it is best to probably close and restart your VS.
I attach to services all the time using VS and it certainly works.
From: wdmaudiodev-bounce@xxxxxxxxxxxxx
[mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of
Arunasree_Swapna@xxxxxxxxxxxx
Sent: Wednesday, August 05, 2009 9:43 AM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Writing LFX APO and issues with .INF file
Folks,
I am in the process of writing an LFX APO that advertizes a 2 channel device
as a 6 channel one.
I am using a debug version of the APO and I am unable to attach to
audiodg.exe.
The VS Debugger compains of lack of symbols to connect to.
Where do I put the symbols to be able to appropriately debug the APO.
I know I am unable to break in to the initialize of the APO and hence think
it is not the problem in the code but that VS is unable to break into the
debugger with symbols.
Any thoughts?
Thanks,
~Aruna
Arunasree Swapna
Software Engineer
Logitech
360-514-5760 (office)
Other related posts:
