I have run all MIDI audio codec tests and all of them pass except three
- Audio Codec - Wave Test - Basic
- Audio Codec - Wave Test - Certification
- Audio Codec - Wave Test - Functional
Attached is the error shown in Log. Error says that selection criteria did
not match any test but still it is marked as failed.
On Wed, Apr 5, 2017 at 9:55 PM, Matthew van Eerde <
The audio tests show up because MIDI uses the KSCATEGORY_AUDIO interface.
When you actually run them they should notice that there are no actual
audio pin factories associated with your device, and skip.
*From: *Neetu Sand <neetu.freelist@xxxxxxxxx>
*Sent: *Wednesday, April 5, 2017 5:27 AM
*Subject: *[wdmaudiodev] Wave test on MIDI Adapter with WLK
I have a device that supports both WDM and MIDI interfaces and I am
running HLK tests on both. However when I create a project using HLK
studio, All tests under "Audio Codec" category, are also listed for MIDI
MIDI driver is a DMUS UART miniport. Is there something wrong in INF that
I need to correct?
Description: PNG image