[wdmaudiodev] Re: Vista Build 5270 + friendly names for audio driver wave devices

  • From: "Jeff Pages" <jeff@xxxxxxxxxxxxxxxx>
  • To: <wdmaudiodev@xxxxxxxxxxxxx>
  • Date: Fri, 17 Feb 2006 15:16:19 +1100

I've now sorted out my endpoint names issue (it helped to have the right build of Vista on the test machine!), but I've noticed another problem with this build. Under the mixer API, each endpoint (input and output) is producing its own mixer device, and each one has a single destination fader and mute and a single source fader and mute that appear to be unrelated to the actual topology reported by the device miniport. In particular, my actual topology for the output endpoint has a peak meter node associated with the master fader/mute as well as faders/mutes for monitoring the inputs, but none of these are being translated to the mixer API.

Jeff Pages
Innes Corporation Pty Ltd


WDMAUDIODEV addresses:
Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx
Subscribe:    mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe
Unsubscribe:  mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe
Moderator:    mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx


Other related posts: