[wdmaudiodev] Re: SYSVAD WASAPI Eclusive playback mode does not work.

  • From: "Matthew van Eerde" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "Matthew.van.Eerde" for DMARC)
  • To: "wdmaudiodev@xxxxxxxxxxxxx" <wdmaudiodev@xxxxxxxxxxxxx>
  • Date: Tue, 3 Jul 2018 13:32:23 +0000

WASAPI exclusive mode is free to use either the host pin or the offload pin, at 
Windows’ discretion.

What app are you using to play in WASAPI exclusive mode?

________________________________
From: wdmaudiodev-bounce@xxxxxxxxxxxxx <wdmaudiodev-bounce@xxxxxxxxxxxxx> on 
behalf of Vincent Burel (VB-Audio) <vincent.burel@xxxxxxxxxxxx>
Sent: Saturday, June 30, 2018 3:18:34 AM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] SYSVAD WASAPI Eclusive playback mode does not work.

Hello,

While testing SYSVAD example…

When opening SYSVAD Speaker in WASAPI Exclusive mode
It uses OFFLOAD pin and changes the method to _WithNotification
Then the TimerNotifyRT function is called...

Q1: why it is using offload mode there (WASAPI input exclusive mode does not 
use this)

The problem is that this mode is not working correct.
When we playback a sound in SYSVAD speaker, the generated file is not conform 
(noise is added ).
Sounds is correct for 100 or 200 ms and then get disturbed by a noise and then 
sounds correct again during hundreds ms and become noisy again.
Attached Picture show the noise incident on 100Hz sinus… we can see the time 
drift and how the noise is added (small part of 16, 32, 48 samples, coming from 
other part of the DMA buffer)

Q2: somebody knows something about this problem ?

Regards
Vincent Burel


Other related posts: