[wdmaudiodev] Re : Re : Re: KS Studio query

  • From: robert.bielik <robert.bielik@xxxxxxxx>
  • To: wdmaudiodev@xxxxxxxxxxxxx <wdmaudiodev@xxxxxxxxxxxxx>
  • Date: Tue, 10 Nov 2015 05:46:45 GMT

Hi Gordon, I know for a fact that kssample does not support WaveRT, and it's
possible that neither does ksstudio.
Regards
/R
------ Ursprungligt meddelande------
Från: gordon keith
Datum: mån, 9 nov 2015 22:59
Till: robert.bielik;
Ämne:RE: Re : [wdmaudiodev] Re: KS Studio query

Hi Robert,

I can add the HDAudio device to ksstudio, just can't connect it to a wave
source, says pin creation failed.

Same with the KSSample application, it plays to a usb dac ok, but can't create
a pin on the hdaudio speaker.

Thanks


From: robert.bielik@xxxxxxxx
To: gordik55@xxxxxxxxxxx; wdmaudiodev@xxxxxxxxxxxxx
Subject: Re : [wdmaudiodev] Re: KS Studio query
Date: Mon, 9 Nov 2015 20:05:39 +0000

Hi Gordon, portaudio will support WaveCyclic and WaveRT devices (which support
"realtime" category), and uses same enumeration methods as ks studio. So I find
it extremely odd that the latter wouldn't list the same devices.
Regards
/R
------ Ursprungligt meddelande------
Från: gordon keith
Datum: mån, 9 nov 2015 20:29
Till: wdmaudiodev@xxxxxxxxxxxxx;
Ämne:[wdmaudiodev] Re: KS Studio query

The Intel HD Audio one.

I'll check out graphedt

thanks


Subject: [wdmaudiodev] Re: KS Studio query
To: wdmaudiodev@xxxxxxxxxxxxx
From: timr@xxxxxxxxx
Date: Mon, 9 Nov 2015 10:13:51 -0800

gordon keith wrote:

In Portaudio I can list and play to laptop speaker as a ks device, but in
ksstudio I can't see it or play to it as a ks device.

Does anyone know why this would be and what I would need to do to render to the
laptop speaker as a ks device.

I realise I could answer by reverse engineering portaudio, but wondered if
anyone could help before I do that.

There's a potential for confusion here, so I want to make sure we're all on the
same page.

When you say "laptop speaker", are you referring to the speaker connected to
the audio hardware on your motherboard? That is, the one that gets exposed as
Realtek Audio or Intel HD Audio or whatever? If so, then that certainly should
be exposed in ksstudio. You can try graphedt and see if you can attach to it
there.

Or is it possible you mean the primitive two-wire speaker that is used for
boot-time error codes? If that's what you mean, that is not a KS device, and
never will be. If Portaudio supports that speaker, then it must have its own
codec and its own buffer management. There is no kernel driver to do that.
--
Tim Roberts, timr@xxxxxxxxx
Providenza & Boekelheide, Inc.

Other related posts:

  • » [wdmaudiodev] Re : Re : Re: KS Studio query - robert . bielik