Hi Tsai, I will investigate on Errata filters and try to install it. Thanks, Gaurav On Fri, Jan 24, 2014 at 12:18 PM, Gaurav Khuntale <gauravkhuntale@xxxxxxxxx>wrote: > Hi Tsai, > > Is there a way to explicitly install Errata filter ? As per my knowledge, > there is only one .cab is available on msdn for download to install filters > on HCK server. > > Thanks, > Gaurav > > > On Fri, Jan 24, 2014 at 12:06 PM, Tsai Tzung-Dar > <tdtsai1973@xxxxxxxxxxxx>wrote: > >> Hi Gaurav: >> This is HCK's problem. I remember there is an Errata for this. You need >> download Errata filter and installer it on you DTM server. Then you can >> find this will change to pass. >> >> ------------------------------ >> *寄件者:* Gaurav Khuntale <gauravkhuntale@xxxxxxxxx> >> *收件者:* wdmaudiodev@xxxxxxxxxxxxx >> *寄件日期:* 2014/1/24 (週五) 2:17 PM >> *主旨:* [wdmaudiodev] Need help in FAIL: Failed >> WriteData(Render)/ReadData(Capture) to see if pin position is moving or not >> >> Hello, >> >> I am working on a virtual audio driver which is based on WaveCyclic >> miniport driver. During Wave Test my driver failing in following test case, >> >> "Standard Streaming\Rendering Pin Tests\Reset Pin while streaming data". >> >> Log file shows following message, >> >> Successfully instantiated KSPIN_DATAFLOW_IN pin >> Submitting 16000 bytes to the pin >> KSPIN_DATAFLOW_IN pin is currently in state KSSTATE_STOP; want it to >> be in state KSSTATE_PAUSE >> Setting KSPIN_DATAFLOW_IN pin to state KSSTATE_ACQUIRE >> Setting KSPIN_DATAFLOW_IN pin to state KSSTATE_PAUSE >> Submitting IOCTL_KS_WRITE_STREAM IRP ... >> IRP is pending... >> KSPIN_DATAFLOW_IN pin is currently in state KSSTATE_PAUSE; want it to >> be in state KSSTATE_RUN >> Setting KSPIN_DATAFLOW_IN pin to state KSSTATE_RUN >> Position reported before issuing KSRESET_BEGIN = 121 bytes >> KSPIN_DATAFLOW_IN pin is currently in state KSSTATE_RUN; want it to >> be in state KSSTATE_RUN >> Resetting Pin state: IOCTL_KS_RESET_STATE (KSRESET_BEGIN) >> Position reported after issuing KSRESET_BEGIN = 0 bytes >> Submitting IOCTL_KS_WRITE_STREAM IRP ... >> GetLastError did not return ERROR_IO_PENDING even though the pin is >> paused >> >> [ GetLastError() returned 21 (0x15) - The device is not ready. ]. >> FAIL: Failed WriteData(Render)/ReadData(Capture) to see if pin >> position is moving or not. >> >> Can anyone please help me in finding where exactly i can check in my >> driver for above failure ? >> >> Thanks. >> >> >> >