Pro Tools? Well, were not specific on the DAW. There are plenty of DAWs that
do. Ardour is probably the one we would wind up using.
—
Paul McGowan | CEO
1-800-PSAUDIO
psaudio.com<http://www.psaudio.com/> Boulder, Colorado
On December 22, 2020 at 8:03:53 AM, Vincent Burel (VB-Audio)
(vincent.burel@xxxxxxxxxxxx<mailto:vincent.burel@xxxxxxxxxxxx>) wrote:
You may try Protools first… just to be sure about what you need.
AFAK, it is not managing 48 i/o with windows audio interface.
Regards
Vincent Burel
De : wdmaudiodev-bounce@xxxxxxxxxxxxx [mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] ;
De la part de Paul McGowan
Envoyé : mardi 22 décembre 2020 15:21
À : wdmaudiodev@xxxxxxxxxxxxx; Jerry Evans
Objet : [wdmaudiodev] Re: Looking for a driver developer
Hi Jerry. Our hardware does conversion from DSD to a special form of PCM that
we’ve developed and then back again to DSD. It’s an interface box with A/D and
D/A converters. The interface box will have 48 channels in and 48 channels out.
We need to then get these channels into a computer so a Digital Audio
Workstation program like Pro Tools can access the I/Os.
—
Paul McGowan | CEO
1-800-PSAUDIO
psaudio.com<http://www.psaudio.com/> Boulder, Colorado
On December 21, 2020 at 4:14:00 PM, Jerry Evans
(jerry@xxxxxxxxxxx<mailto:jerry@xxxxxxxxxxx>) wrote:
Ah, the UAC2 paradox revisited.
(Nice specs/nice kit notwithstanding) does your hardware do something other
than audio I/O?
From: wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx>
<wdmaudiodev-bounce@xxxxxxxxxxxxx<mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx>> On
Behalf Of Paul McGowan
Sent: 21 December 2020 21:36
To: wdmaudiodev@xxxxxxxxxxxxx<mailto:wdmaudiodev@xxxxxxxxxxxxx>
Subject: [wdmaudiodev] Looking for a driver developer
We are a small high end audio manufacturer in Colorado looking someone to
design for us a Windows 10 Thunderbolt driver so we can get in and out 48
channels of 192kHz 32 to 64 bit floating point audio - to mate with an ASIO API.
Anyone up for the challenge or know of somewhere other than Thesycon? You can
email me at paul@xxxxxxxxxxx<mailto:paul@xxxxxxxxxxx> or through the forums.
Thanks.
—
Paul McGowan | CEO
1-800-PSAUDIO
psaudio.com<http://www.psaudio.com/> Boulder, Colorado
