[wdmaudiodev] Re: HCK DRM test on USB portcls driver
- From: Tim Roberts <timr@xxxxxxxxx>
- To: wdmaudiodev@xxxxxxxxxxxxx
- Date: Mon, 1 Jul 2019 10:13:34 -0700
Michael Johansen wrote:
I am doing Windows 7 HCK testing on a USB audio driver.
One of the tests fails with this error:
....
Message 7-1-2019 2:06:50.887 authParam.NumFailures = 5, expected at
least 3
Message 7-1-2019 2:06:50.887 Failure condition: usbccgp.sys could not
be detected in the list of expected failed drivers
What am I doing wrong here?
Is this an actual USB device, or are you using a USB remoting solution,
like USB-over-Ethernet? Or, is this a USB 3 device? Windows 7 did not
have USB 3 support, so whatever USB 3 driver stack you have was provided
by the host controller manufacturer, not by Microsoft, and that means
usbccgp.sys is not present. If your computer has a USB 2 port, you
should try plugging in your device there.
--
Tim Roberts, timr@xxxxxxxxx
Providenza & Boekelheide, Inc.
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
Other related posts: