As always great job Steve. BtW, here are the latest Optimised INI files
which you may wish to add to the website:
https://www.dropbox.com/s/a15mqhok6wxzro5/optimised_ini_files%20For%20Sampli
tude%20Pro%20X%207.zip?dl=1
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of Steve Spamer
Sent: Sunday, May 21, 2023 10:06 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] X7 May scripts now available.
Hi guys.
I've just posted the latest build of the scripts for X7.and I'll put the
link to the downloads page at the bottom of this e mail. Please read the
WhatsNew.html, along with details within the "WorkspaceConfig" folder
included in the archive.
***start instructions***
It's now possible to toggle and get feedback on the metronome, snap active
and auto crossfade controls from the Arranger. I'll post the instructions
here to enable this, as a workspace needs to be loaded first
In the Samplitude Access V9.1-May 2023 update, the ability to toggle the
metronome, auto crossfade and snap active controls on/off with feedback has
been included.
However, in order to load the correct toolbar, you need to perform either a:
1. A full install via the Samplitude Access installer.
or
2. Install only the Jaws scripts via the Samplitude Access installer, then
load the included "SamplitudeAccessToolbar.TBX2" workspace separtely.
If you choose to only install the Jaws scripts, please do the following:
1. Install the Jaws scripts via the samplitude Access installer.
2. Copy and paste the included "SamplitudeAccessToolbar.TBX2" file, found
within the "WorkspaceConfig" folder to the following location:
"C:\ProgramData\MAGIX\Samplitude Pro X7 Suite\Workspaces".
3. Start Samplitude X7.
4. Start a new project and navigate to the View/Workspace sub menu and press
enter on "select workspace".
5. In this menu, arrow down to SamplitudeAccessToolbar" and press enter to
load it.
6. At this point, you may want to save this loaded workspace with a new
name, but it's optional. To do so, go back to the View/Workspace sub menu
and select "save workspace" and give it a name you want.
After doing the above, you should now find that the metronome, auto
crossfade and snap active controls are available to you with on/off
feedback. The keystrokes are:
Control plus shift plus C to toggle the metronome.
Alt plus shift plus dash to toggle snap active.
Alt plus shift plus equals to toggle auto crossfade.
.
***end****
Download the May X7 update here:
http://samplitudeaccess.org.uk/download/
Best steve.
Samplitude Access-The Gateway To Pro Recording With Samplitude For the
Visually Impaired: <http://www.samplitudeaccess.org.uk>
www.samplitudeaccess.org.uk
Follow me on Twitter:
stevesax123
Contact me:
Mobile:
+44 (0)7733373714
E-Mail:
stevespamer68@xxxxxxxxx <mailto:stevespamer68@xxxxxxxxx>
