Hi guys,
I am pretty sure I updated Samplitude to the latest and then installed
access v9.02 just a bit ago.
No problems so far.
It all seems to work great but when I press insert plus q it still
tells me the Samplitude build is build 25.
That confuses me.Is this normal?
Thanks,
Floyd...
On 3/23/21, Steve Spamer <stevespamer68@xxxxxxxxx> wrote:
You’re welcome Bob. You probably lost the time display on the docker after--
you updated, which I think you said you did. IN that case, ranges wouldn’t
have worked, as they require time information. If you follow the steps to
save a workspace, then if it happens again, you just need to load that
workspace again.
Best steve.
Samplitude Access-The Gateway To Pro Recording With Samplitude For the
Visually Impaired: <http://www.samplitudeaccess.org.uk>
www.samplitudeaccess.org.uk
Follow me on Twitter:
stevesax123
Contact me:
Mobile:
+44 (0)7733373714
E-Mail:
stevespamer68@xxxxxxxxx
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of Robert Reid
Sent: 23 March 2021 19:51
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Samplitude Access V9.02 now available
I just want to add my voice to the appreciation of these new Scripps.
somehow, I had broken range navigation a couple of weeks ago but now it is
back and working perfectly along with some other minor glitches.
thanks again.
Bob
Sent from my iPhone
On Mar 22, 2021, at 9:37 AM, Steve Spamer <stevespamer68@xxxxxxxxx
<mailto:stevespamer68@xxxxxxxxx> > wrote:
Hi folks. I’m pleased to announce that Samplitude Access V9.02 is available
for download. Please read the below information, as it’s important, but you
can grab the scripts here:
http://samplitudeaccess.org.uk/download/
Please read the included what’s new document for all the changes in this
build, but most importantly, please follow the below steps when installing
these scripts.
1, Please update your version of samplitude to the latest available version
first via the Magix auto update option in Samplitude’s help menu, or via the
update dialog when starting Samplitude if it launches.
2, Exit Samplitude and uninstall your current samplitude Access scripts via
the Add/Remove programs or uninstaller located here:
"C:\Program Files\Samplitude Access X5\uninstall.exe"
Or
"C:\Program Files\Samplitude Access X4\uninstall.exe".
Note: For users who wish to keep any configuration they’ve made, backing up
your INI files will not really be an option, as this build includes a few
new keystrokes. So, simply replacing any back up’s will mean you will
overwrite the new keystrokes. So, unfortunately, those specific
configurations you’ve made will have to be re-done, sorry about that.
One positive aspect of this build regarding installing and re-installing
after an update, is that it should no longer be necessary to ever re-install
the INI files again, unless there are changes to those INI files that
require it. Currently, after a Samplitude update, or simply if the update
dialog launches, we can lose the time display on the docker, which means the
transport no longer speaks. With the addition of being able to save and load
a workspace in this build, we can easily load a save workspace again, hence
bypassing the need to reinstall INI files…please see below.
3, Install the V9.02 build of the scripts by choosing the full installation
option.
4, Launch Samplitude and load a project or new project. Make sure you’re
able to move the transport with left/right arrows and here the time being
reported. If you can’t, please post here to report this.
5, Follow the below steps to save this workspace:
Note: This is only for X5 users, as the workspace option is not in X4.
To save and load a workspace, due the following:
Press alt plus shift plus W to open the workspace menu.
Arrow to save workspace and press enter. A dialog will open, so give the
workspace a name, (E.G. Samplitude Access Workspace) and press enter.
Note: Important, always save this file in the default location:
C:\ProgramData\MAGIX\Samplitude Pro X5 Suite\Workspaces
After saving this workspace, you can load it when needed by pressing control
plus alt plus W and selecting the workspace you saved.
So, if you ever lose the speaking of the transport, just load your saved
workspace to enable it again.
Enjoy!
Best steve.
Samplitude Access-The Gateway To Pro Recording With Samplitude For the
Visually Impaired: <http://www.samplitudeaccess.org.uk>
www.samplitudeaccess.org.uk
Follow me on Twitter:
stevesax123
Contact me:
Mobile:
+44 (0)7733373714
E-Mail:
stevespamer68@xxxxxxxxx <mailto:stevespamer68@xxxxxxxxx>
