Hi JPR
It happens on all projects including new ones.
Thanks
Greg
From: vipaudioaccess-bounce@xxxxxxxxxxxxx <vipaudioaccess-bounce@xxxxxxxxxxxxx>
On Behalf Of Jean-Philippe Rykiel
Sent: 08 March 2020 17:27
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: NOT SPEAKING MEASURES
All right Greg. What happens if you open another project, or create a new one.
Do bars speak in this case?
Best,
JPR
http://jeanphilipperykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel
Le 08/03/2020 à 17:37, (Redacted sender greg.hamilton1961 for DMARC) a écrit :
Hi JPR and thanks for that.
Unfortunately it didn’t work.
It’s almost as though there’s something in the way, but I can’t really tell.
Perhaps you or the other folks have some more ideas?
Thanks again
Greg
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>
<vipaudioaccess-bounce@xxxxxxxxxxxxx> On Behalf Of Jean-Philippe Rykiel
Sent: 07 March 2020 22:49
To: vipaudioaccess@xxxxxxxxxxxxx <mailto:vipaudioaccess@xxxxxxxxxxxxx>
Subject: [vipaudioaccess] Re: NOT SPEAKING MEASURES
Hi Greg.
Two things you can do. First, type control p which should bring focus back to
the VIP window. If this has no effect, reinstall the scripts. You don’t
necessarily need to reinstall the Hall bit, but what is important is that you
reinstall the INI files for Samplitude to behave as it should.
Cheers,
JPR
http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
Http://www.facebook.com/jprykiel
Le 7 mars 2020 à 23:05, (Redacted sender greg.hamilton1961 for DMARC)
<dmarc-noreply@xxxxxxxxxxxxx <mailto:dmarc-noreply@xxxxxxxxxxxxx> > a écrit :
Hi All
Wonder if you can advise on a problem please?
I was messing around with some drums and after that, I am not hearing the
measures spoken by jaws. What I mean is, when I arrow left and right to see
what measures there are, I’m not getting any feedback.
I’ve tried closing samplitude and re-opening the program but to no avail.When
I use the right and left arrow, the measures are being moved through but in
silence.
Hoping somebody can help.
Thanks
Greg