Thanks
-----Original Message-----
From: vi-kindle-bounce@xxxxxxxxxxxxx <vi-kindle-bounce@xxxxxxxxxxxxx> On Behalf
Of William Brandes
Sent: Monday, August 17, 2020 5:38 PM
To: vi-kindle@xxxxxxxxxxxxx
Subject: [vi-kindle] Re: While trying to start for the first time, I got my
voice view out of english
Hi Larry. You have two ways to start the voice view screenreader:
Both are given at the following link plus much more:
To enable VoiceView during first-time setup:
1. Press the power button located next to the USB power port.
2. Wait for the device to load the language section screen.
3. Triple press the power button, and wait for VoiceView to start.
You can also enable VoiceView after setup:
1. Press the power button located next to the USB power port.
2. Wait for the device to load the language section screen.
3. Press and hold the power button until you hear an alert sound.
4. Hold two fingers slightly apart on the screen for five seconds to enable
VoiceView.
https://www.amazon.com/gp/help/customer/display.html?nodeId=201829330
As for whisper sync, no. Everything is driven by connecting to wifi.
During set-up you will be given that option to set up. However, it can be done
later.
The power button is located at the top right of the Fire tablet. Top left is
the volume rocker.
Changing language, might be a bit tricky. But, give this a try:
When on the Home screen, the one with all of the icons for applications, do the
following:
Open up the notification bar by swiping with two fingers from the top of the
screen down, and tap More.
1. In the Settings menu select the “Language & Keyboard” category.
2. Tap the Device Language button.
3. Now all that's left to do is select your preferred language. Once selected
the Kindle Fire will immediately begin using the new language.
Stay well. William
On 8/17/20, llumpkin@xxxxxxxxxxxxx <llumpkin@xxxxxxxxxxxxx> wrote:
I got voice view to speak but it came up in non-english. How do I get
it to start over or get it back to English