Yes. First, put it on a thumb drive
Then navigate to the thumb drive in file manager
Copy it to the root of the flash disk
Go to settings
Go to update
You will see it
Click on it
It will then unzip
Then it will install
Kind Regards
Paul Heidhues CPC
Senior Engineering Recruiter
Hire4Engineering LLC
Office, (210)909-7578
<mailto:paulh@xxxxxxxxxxxxxxxxxxxx> paulh@xxxxxxxxxxxxxxxxxxxx
<http://www.linkedin.com/in/pheidhues> www.linkedin.com/in/pheidhues
<http://www.hire4engineering.com> www.hire4engineering.com
From: varioultra-bounce@xxxxxxxxxxxxx <varioultra-bounce@xxxxxxxxxxxxx> On
Behalf Of gpaikens@xxxxxxxxx
Sent: Friday, May 25, 2018 3:57 PM
To: varioultra@xxxxxxxxxxxxx
Subject: [varioultra] Trouble updating from Firmware 1.32 to 1.42
Hello all,
I have a VarioUltra 40 that is currently running Firmware 1.32. I have
downloaded the Firmware 1.42 update from the dropbox link on the Baum
support page but am not able to get the update to work. I copied the zip
file to VarioUltra Storage using File Explorer in Windows. I cannot find the
System menu in Settings on my display so I used the B7+B8+D3+D6 to start an
update. It appears that it is running and update and my device restarts once
or twice. Once it restarts though, it is still running 1.32 when I look at
the About section under Help.
Can anyone offer any advice?
I also tried copying to an emptyUSB stick and copying from there to the
Flash memory. Again, I had to use the same command though because System is
not showing up under Settings.
Thanks for any help.
Best,
Greg
