[uae] Re: Euae on Peg2/MorphOS
- From: CountRaven <chris.countraven@xxxxxxxxx>
- To: uae@xxxxxxxxxxxxx
- Date: Wed, 19 Mar 2008 14:35:20 +0200
ok thaanks!
On 3/19/08, Andrew 'Truck' Holland <truck@xxxxxxxxxx> wrote:
> On Mi, 19 M?r 2008, CountRaven wrote:
>
> > thanks for all the info. I will try to work on them.. and maybe
> > install form the scratch. by the way when I was refering to "packages"
> > on Aminet i meant AmigaSYS pacakages -perhaps a verison that would
> > work on MOS- but a sI saw on the link you provided it is Picasso96.
> > Anyway I will try to install Picaso96 inside the emulated Amiga and
> > see if it does do the trick. However I have a strong belief that it
> > all depends on a specific setting or settings that are not included on
> > my conf file. Is there any link with readme documention about euae or
> > even AmisSYS in MOS that would probably explains the settings?
> > You cna optionally send me your ..conf or uaerc file to view and compare.
> > Reply when you are back and THANKS for al the support. You have been
> > veyr helpful.
> > all the best
>
> Well, mine is a modified Hi-Toro config as I recall (: So really, ANY .uaerc
> file from anyone should work. I'm afraid as I leave for Breakpoint in a few
> hours, and I'm at work, I can't send it right now. But again, this should
> all be straight up Amiga stuff - the only settings for UAE dealing with
> picasso are the amount of ram. Even 'fullscreen mode' doens't matter -
> that's for fullscreen 'native' modes. NTSC, PAL, Double Pal, etc.
>
> I set amount of ram to be 32 megs (I belive this is max; someone please
> correct that if it's incorrect.)
>
> Oh, one thing that DOES matter - screenmodes. Be sure you have your
> screenmode that you wish to use with your amiga set up in whichever MorphOS
> frontend (Ambient, more than likely.) The Picasso driver will detect that
> (just like it does with all other OS's.)
>
>
>
Other related posts:
