[uae] 0.8.27-RC1 Not working on Mandrake 10 (Official)

  • From: Vándorffy Tamás <tvandor@xxxxxxxxxx>
  • To: uae@xxxxxxxxxxxxx
  • Date: Sat, 23 Oct 2004 23:05:38 +0200

Hi All,

Greetings Everyone, this is my first post here, although I've
been following Rich's development form almost the beginning.
I am very happy that Rich took over the unix port, because
I had been missing a usable amiga emulator on my
Unix box from a long time... Imagine this: I had to 
reboot my computer and start windows if I wanted to use
my amiga emluation enviroment... Very inconvenient...:-))
(To say the least... :-) )

Anyway, I tried to compile 0.8.27-RC1 and 0.8.27-CVS on my Mandrake 10.0 
(Official) system but this version of E-UAE does not seem to work at all. 
I tried to use the binary provided on the site, but it did not work either.

I configured the source like this:
/configure --with-sdl --with-sdl-sound --with-sdl-gfx --enable-scsi-device 
--enable-jit --enable-cd32 --enable-cdtv

And I recveived these messages while I tried to run e-uae:
Found 0 joysticks
Found x11pc raw keyboard mapping
Using cooked keymap
Opening cfgfile '/home/tvandor/.uaerc'...okay.
unknown config entry: 'gfx_filter_scanlineratio=17'
unknown config entry: 'gfx_filter_scanlinelevel=0'
unknown config entry: 'gfx_filter_scanlines=0'
unknown config entry: 'gfx_filter_horiz_offset=0'
unknown config entry: 'gfx_filter_vert_offset=0'
unknown config entry: 'gfx_filter_horiz_zoom=0'
unknown config entry: 'gfx_filter_vert_zoom=0'
unknown config entry: 'gfx_filter=no'
Can't use a graphics card or Zorro III fastmem when using a 24 bit
address space - sorry.
Testing the RDTSC instruction ... done.
Calibrating delay loop.. ok - 1724,08 BogoMIPS
Testing system sleep function.......
Average duration of a 1ms sleep: 2 ms
Found 0 joysticks
Found x11pc raw keyboard mapping
Using cooked keymap
drivename:DF0:
drivename:DF1:
drivename:DF2:
drivename:DF3:
Entered action_replay_load()
Follow sprite mode set
Resetting frame rate hack
Building CPU table for configuration: 68020/881 24-bit addressing
1866 CPU functions
Building CPU function table, 45954 opcodes (3 0 1).
JIT: Max CPUID level=2 Processor is GenuineIntel
JIT: have_cmov=1, have_rat_stall=1
JIT: Setting signal handler
JIT: Building Compiler function table
JIT: Supposedly 42346 compileable opcodes!
Resolution: 800 x 600 x 16
SDL sound driver found and configured for 16 bits at 44100 Hz, buffer is 2048 
samples
Resetting frame rate hack
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8
Illegal instruction: 444f at 0x200ff8

.. and also a blank screen was present and I had to kill the process...

Well all there is to it right now...

Thanks, (and sorry for the longish post.)

Cheers,

Tamas

Other related posts: