[trowmensshed] Re: old tools project

From: Gordon Endersby <gordon@xxxxxxxxxxxxxxxx>
To: trowmensshed@xxxxxxxxxxxxx
Date: Fri, 16 Apr 2021 11:34:36 +0100

Getting to it.
He should have some this morning.
Sorry for the delay again. Finding it hard to get round to doing
things.My brain seems to be working a bit better this morning so will
get some done.Unfortunately modern services like this require you to
hand over half your identity.
and go through multiple steps to add someone else as user then promote
them to Admin.
Trying to remember all the steps is a bit hard for me at the moment.
My memory is crap at the moment so it means ive got to go over all my
old notes to remind myself.
Should have a lot of it sorted today.
Gordon

On Thu, 2021-04-15 at 20:26 +0100, Dennis Drewett wrote:

Thanks for that Gordon. Have you sent information to Alan yet?

Regards,
Dennis Drewett
Sent from my Mobile Device.
This email originates from Dennis Drewett  and any files transmitted
with it may contain confidential information and may be subject to
Copyright or Intellectual Property rights. It is intended solely for
the use of the individual or entity to whom they are addressed. If
you have received this email in error please notify the sender and
delete the email from your inbox. Any disclosure, reproduction,
dissemination, modification and distribution of the contents of the
email is strictly prohibited. No contract is intended by this email,
and any personal opinions expressed in this message are those of the
sender and should not be taken as representing views of anyone.
Please note I do not warrant that any e-mail or attachments are free
from viruses or other defects and accepts no liability for any losses
resulting from infected e-mail transmissions. Receipt of this e-mail
does not imply consent to use or provide this e-mail address to any
third party for any purpose.

-------- Original message --------
From: Gordon Endersby <gordon@xxxxxxxxxxxxxxxx>
Date: 15/04/2021  20:19  (GMT+00:00)
To: trowmensshed@xxxxxxxxxxxxx
Subject: [trowmensshed] Re: old tools project

Ive done something similar at home using peg board. Image attached.
Its on a wheeled base for my situation.
I used metal clip in hangers that are very cheap on ebay as well as a
few specialist mounts that Ive made from scrap wood.
And some magnetic strips.
Dont forget to put batons behind the peg board to make space for
anything pushed through the holes.

Ive got most of my hand tools on it or in the drawers below.Its
worked for a while but the biggest problem ive found is dust
especially on the hand planes.
So Im planning on building a dutch tool chest for my hand tools.
Loads of images to google.
There is also something called french cleats that a lot of workshops
use.Very versatile if you have the wall space. Again loads to google.

Gordon

On Thu, 2021-04-15 at 19:46 +0100, Dennis Drewett wrote:

Jill it all sounds good and I'm sure it will be ok with the
committee just need their nod. Thanks for taking control of the
project.Dave, Al are you on board with the expenditure for the Pin
Board?
Regards,
Dennis Drewett
Sent from my Mobile Device.
This email originates from Dennis Drewett  and any files
transmitted with it may contain confidential information and may be
subject to Copyright or Intellectual Property rights. It is
intended solely for the use of the individual or entity to whom
they are addressed. If you have received this email in error please
notify the sender and delete the email from your inbox. Any
disclosure, reproduction, dissemination, modification and
distribution of the contents of the email is strictly prohibited.
No contract is intended by this email, and any personal opinions
expressed in this message are those of the sender and should not be
taken as representing views of anyone. Please note I do not warrant
that any e-mail or attachments are free from viruses or other
defects and accepts no liability for any losses resulting from
infected e-mail transmissions. Receipt of this e-mail does not
imply consent to use or provide this e-mail address to any third
party for any purpose.

-------- Original message --------
From: Jill Hillman <jill.hillman21@xxxxxxxxx>
Date: 15/04/2021  19:30  (GMT+00:00)
To: trowmensshed@xxxxxxxxxxxxx
Subject: [trowmensshed] old tools project

Thanks for that Kevin. When l looked it up l saw that to get the
size l wanted l would need to buy a large sheet, so l worked it out
for two cut sizes, one l can use at home, and the company can cut
to size for very little. The postage was quite a bit. Dennis said
to wait so l left the order in the basket. The company then said if
l would complete the order in 24 hrs l would get a discount which
worked out the same as the one you sent me from Ebay Dennis so l
thought l would go ahead and order it. I'm happy to pay for it and
would love some help putting it up. The grey on the wall is fine
Kev. Yes, pegs, next mission....and yes painted same colour....we
can also make little shelves...(l say 'we')

Hope that sounds ok chaps. J x
--
Jill Hillman MA Fine Art
20 West Ashton Road
BA14 7BQ
www.wiltshireart.com
01225 781 843

References:
- [trowmensshed] Re: old tools project
  - From: Dennis Drewett

[trowmensshed] Re: old tools project

Other related posts: