[THIN] Re: published apps through firewall.
- From: "Chris Lynch" <lynch00@xxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 24 Dec 2002 09:26:49 -0800
One other thing you wil need to do is on your client. Make sure that
you have enabled "Use Alternate Address" within the FIREWALLS button.
This is located in the Application Set Settings, on the General Tab.
Chris
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Paul Beckman
Sent: Tuesday, December 24, 2002 9:23 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: published apps through firewall.
I have done what you suggested already... still no good.
-----Original Message-----
From: Joe Shonk [mailto:JShonk@xxxxxxxxxxxxxx]
Sent: Tuesday, December 24, 2002 11:19 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: published apps through firewall.
A few things...
Close off ports 1604 and 80 (since you mentioned you changed the XML =3D
port)
Open up the port for XML.
Assign the public address to the firewall and translate it to the =3D
internal ip of the server (the server should only have one IP address =
=3D
assigned)
Set the Altaddr on the server.
Other suggestions, Implement SSL Relay. Having the XML service open =
=3D
to the public will expose which application are published.
Joe
-----Original Message-----
From: Paul Beckman [mailto:pbeckman@xxxxxxxxxxxxxxxxxxxx]
Sent: Tuesday, December 24, 2002 8:13 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] published apps through firewall.
I am running XP on W2k.
I have 1494, 1604, and 80 with a public address translated to my =3D
internal Citrix IP. I can browse the apps but get an I/O error when
trying to connect. If I put the public address in the server box on a
custom ICA connection = =3D I can connect to the desktop. If I stop and
restart the IMA service I can connect to the published =3D apps once,
but if I disconnect I can not reconnect. I have also put the XML port on
a different port # We do not have IIS running on this server. and I also
created open ports for another server and the same thing =3D happens. I
have been on the phone with Citrix and no luck. =3D20 Does anyone have
any ideas? =3D20 Thanks, Paul
***********************************************=3D20
This Weeks Sponsor: 99point9.com
The 99Point9.com Online Tech Support=3D20
Helpdesk is the one-stop solution for all=3D20
your server-based computing needs.=3D20
http://www.99point9.com
************************************************
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
***********************************************=20
This Weeks Sponsor: 99point9.com
The 99Point9.com Online Tech Support=20
Helpdesk is the one-stop solution for all=20
your server-based computing needs.=20
http://www.99point9.com
************************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
***********************************************
This Weeks Sponsor: 99point9.com
The 99Point9.com Online Tech Support
Helpdesk is the one-stop solution for all
your server-based computing needs.
http://www.99point9.com
************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
***********************************************
This Weeks Sponsor: 99point9.com
The 99Point9.com Online Tech Support
Helpdesk is the one-stop solution for all
your server-based computing needs.
http://www.99point9.com
************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
