[THIN] Re: nfuse firewall setup help...
- From: Paul Beckman <pbeckman@xxxxxxxxxxxxxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Mon, 22 Jul 2002 13:36:29 -0500
You know... I thought of that... But I am the only one that is allowed to
state the obvious!!
Trust me, I did not type the usernema or passwrod wrong, (just kidding)
because I can log in just fine from the nfuse server in the DMZ.
-----Original Message-----
From: Jensen, Jay [mailto:jjensen@xxxxxxxxx]
Sent: Monday, July 22, 2002 1:04 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: nfuse firewall setup help...
User id / password are incorrect for the domain you are logging into.
-----Original Message-----
From: Paul Beckman [mailto:pbeckman@xxxxxxxxxxxxxxxxxxxx]
Sent: Monday, July 22, 2002 12:29 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: nfuse firewall setup help...
ERROR: The MetaFrame server farm reported that the Credentials entered were
incorrect.
this is the error I get when I try to log in
-----Original Message-----
From: Paul Beckman
Sent: Monday, July 22, 2002 12:09 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: nfuse firewall setup help...
I have 1494 open and still no luck. what are the settings on the admin page
for the serverside firewall?
We have a Cisco pix firewall, then the nfuse server in the dmz on a
172.16.x.x address and then our citrix servers on the private side on the
10.1.x.x, so how would I set this up.
Thanks
-----Original Message-----
From: Stansel, Paul [mailto:Paul.Stansel@xxxxxxxxxxxxx]
Sent: Monday, July 22, 2002 9:57 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: nfuse firewall setup help...
Do you have 1494 open on the external firewall?
-Paul
> ----------
> From: Paul Beckman[SMTP:pbeckman@xxxxxxxxxxxxxxxxxxxx]
> Reply To: thin@xxxxxxxxxxxxx
> Sent: Monday, July 22, 2002 10:57 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] nfuse firewall setup help...
>
> this got lost in all of the out of office emails so I thought I would send
> it again and see if anyone can help.
>
> Thanks,
> -----Original Message-----
> From: Paul Beckman
> Sent: Friday, July 19, 2002 6:36 PM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] nfuse firewall setup help...
>
>
> I am putting our nfuse web server on our DMZ and was wondering how to set
> it up so that the users from the out side can log in.
> They can get to the nfuse web page but when they try to log on it says
> that the citrix server will not validate logon..
>
> If I run it from the nfuse server itself it will logon fine.
>
> any ideas?
>
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
