[THIN] Re: netscalers and smartcards (CAC) - who's using them?
- From: "Steve Greenberg" <steveg@xxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 8 Jan 2009 13:57:56 -0700
Just to be clear, you do not have the Netscaler handling authentication for
the WI? Is that correct? I.e. you login in to the SSL VPN and then you login
with your smart card to the WI??
Steve Greenberg
Thin Client Computing
34522 N. Scottsdale Rd D8453
Scottsdale, AZ 85266
(602) 432-8649
www.thinclient.net
steveg@xxxxxxxxxxxxxx
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Steve Snyder
Sent: Thursday, January 08, 2009 1:43 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: netscalers and smartcards (CAC) - who's using them?
I.m perusing it and trying to compare - the interface is quite different for
8.1
The on diff I so see is the Configure Auth Server - they had me enter
SubjectAltName:PrincipalName in the user field and left the group field
blank
I don't know if that's something that will vary with CACs/certs, but it's
worth a try.
On Thu, Jan 8, 2009 at 4:03 PM, <peter_dibbens@xxxxxxxxxxx> wrote:
Hi,
Have you seen this article http://support.citrix.com/article/ctx116373.
I can vouch that the certificates components work as expected. You must also
configure all the prerequisites for WI Pass-through.
Thanks Pete
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Steve Snyder
Sent: Thursday, 8 January 2009 10:40 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] netscalers and smartcards (CAC) - who's using them?
and what did you have to do to get the WI to come up properly?
We're trialing a NS 8.1 in our DMZ - the VPN tunnel connects and it starts
to load the WI site but the smartcard (CAC) authentication just doesn't fly.
Citrix is scratching their heads.
Other related posts:
