[THIN] Re: is there anyone with a stable CAG/AAC environment?

  • From: "Jeff Pitsch" <jepitsch@xxxxxxxxx>
  • To: thin@xxxxxxxxxxxxx
  • Date: Sun, 26 Feb 2006 11:14:28 -0500

So you had to edit the hosts file on the AAC server to resolve itself?

Jeff


On 2/24/06, Pavlo Ignatusha <PIGNATUSHA@xxxxxxxxxxxxx> wrote:
>
> OK, citrix engineer made VPN to work in our AAC setup. He said AAC server
> was not resolving it's own address so he added it to the hosts file... very
> strange, but VPN works fine now.
>
> I have a general question about AAC use. For users on the trusted network
> do you point them to your logon point in AAC or you give them the Web
> interface? Any thoughts on that?
>
>
> Thanks,
>
> Pavlo Ignatusha
> Systems Network Coordinator
> Pembroke Regional Hospital
> tel. (613) 732-3675 #6150
> fax. (613) 732-9986
>
> -----Original Message-----
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]*On
> Behalf Of *Pavlo Ignatusha
> *Sent:* February 21, 2006 12:09 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: is there anyone with a stable CAG/AAC environment?
>
>  I'm having citrix engineer to look at it this this afternoon. I'll keep
> you folks posted.
>
>
> Thanks,
>
> Pavlo Ignatusha
> Systems Network Coordinator
> Pembroke Regional Hospital
> tel. (613) 732-3675 #6150
> fax. (613) 732-9986
>
> -----Original Message-----
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]*On
> Behalf Of *Jeff Pitsch
> *Sent:* February 21, 2006 10:26 AM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: is there anyone with a stable CAG/AAC environment?
>
> Yea, been there done that.  I switch it back to just CAG and everything
> works like a charm.  Switch back to AAC and poof, gone.
>
> Jeff
>
>
> On 2/21/06, Pavlo Ignatusha <PIGNATUSHA@xxxxxxxxxxxxx> wrote:
> >
> > I just started with it (CAG/AAC 4.2) and wish to discuss it as well.
> >
> > As for the question about HTTP errors try to re-install the appliance.
> > Save config (this also saves the SSL cert) and re-load appliance from the
> > CD. You can also check the AAC server if the logonpoint is stable and
> > available.
> >
> > I'm having problem where my web proxy and ICA stuff works but Secure
> > Access Agent is not working. I have access and connection policy setup for
> > Entire network resource but Agent is not coming  up after logging into CAG
> > and if I try to start it manually it errors out:" unable to start the
> > secure access agent. please re-launch the secure access agent."
> >
> > Thanks,
> >
> > Pavlo Ignatusha
> > Systems Network Coordinator
> > Pembroke Regional Hospital
> > tel. (613) 732-3675 #6150
> > fax. (613) 732-9986
> >
> > -----Original Message-----
> > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]*On
> > Behalf Of *Jeff Pitsch
> > *Sent:* February 19, 2006 5:13 PM
> > *To:* thin@xxxxxxxxxxxxx
> > *Subject:* [THIN] is there anyone with a stable CAG/AAC environment?
> >
> > Ok, is there anyone with a stable CAG/AAC environment out there?  I'd
> > love to have some discussions with you.
> >
> > Jeff
> >
> > The information in this email belongs to the Pembroke Regional Hospital
> > and may contain confidential and privileged information for the sole use of
> > the individual or organization to which it is addressed. If you are not the
> > intended recipient, you are hereby notified that any disclosure, copying or
> > distribution of the contents of this email is prohibited. If you have
> > received this email in error, please contact the sender and destroy all
> > copies of the original message.
>
>
> The information in this email belongs to the Pembroke Regional Hospital
> and may contain confidential and privileged information for the sole use of
> the individual or organization to which it is addressed. If you are not the
> intended recipient, you are hereby notified that any disclosure, copying or
> distribution of the contents of this email is prohibited. If you have
> received this email in error, please contact the sender and destroy all
> copies of the original message.
>
> The information in this email belongs to the Pembroke Regional Hospital
> and may contain confidential and privileged information for the sole use of
> the individual or organization to which it is addressed. If you are not the
> intended recipient, you are hereby notified that any disclosure, copying or
> distribution of the contents of this email is prohibited. If you have
> received this email in error, please contact the sender and destroy all
> copies of the original message.
>

Other related posts: