[THIN] Re: failed to start.

  • From: Philip Walley <mythinlist@xxxxxxxxx>
  • To: thin@xxxxxxxxxxxxx
  • Date: Wed, 21 Dec 2005 08:03:55 -0600

i've had no problems with the dns resolution. don't think that's going to be the problem. i don't remember if you ever tried it or not (and i'm too lazy to read the back emails) but did you ever delete those 3 reg entries on the server side for the TS license? did they recreate after reboot?

Jay Moock wrote:

I find this setting in MPS 3.0 in PSC under Metaframe Settings in the Farm
Properties screen.

Enabling it in our environment causes us all kinds of trouble.


-----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Schneider, Chad M Sent: Tuesday, December 20, 2005 4:13 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: failed to start.

Does this affect PS 3.0 and 4.0?  This was for XP.  I no longer see that
option for the newer versions of Citrix.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Jay Moock
Sent: Tuesday, December 20, 2005 3:04 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Have you tried disabling XML Service DNS address resolution?

http://support.citrix.com/article/entry.jspa?entryID=1624

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Schneider, Chad M
Sent: Tuesday, December 20, 2005 3:54 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Actually, neither worked for published apps.

I have not tried set resolutions.  Will try that.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Jay Moock
Sent: Tuesday, December 20, 2005 2:43 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Jumping in late here, so forgive me if this has already been covered...

As I understand it you started out with 2 MPS 4.0 servers, one worked fine,
the other would not allow you to connect to Published Apps (Desktops OK).

RDP - OK

You downgraded to MPS 3.0 and had to hack around to get anything to work,
and now you are back where you started.


Have you tried running the published apps at a specifc resolution or full screen (as opposed to Seamless)? Just trying to see if it is a seamless engine issue...

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Philip Walley
Sent: Tuesday, December 20, 2005 2:43 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

man, maybe someone else can jump in cause i'm out of ideas


Schneider, Chad M wrote:



7022 and 7034.

Client network service hung on starting and then terminated unexpectedly.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On


Behalf


Of Philip Walley
Sent: Tuesday, December 20, 2005 1:29 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

so what is the even id?

Schneider, Chad M wrote:





I know...looking at my path statement, what else can I hack out?

Have all the M$ and Citrix at the beginning.

122 takes me to


"C:\WINDOWS;C:\WINDOWS\System32;C:\WINDOWS\System32\Wbem;C:\Program Files\Citrix\system32;C:\Program Files\Citrix\System3"2\Citrix\IMA;C:\Program Files\Citrix\System32\Citrix\IMA\Subsystems;c:\windows\crystal;C:\Utils;;

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On




Behalf




Of Philip Walley
Sent: Tuesday, December 20, 2005 10:17 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

a quick google found http://support.citrix.com/kb/entry.jspa?externalID=CTX103330

Schneider, Chad M wrote:







I think the trouble is this....both getting this error.

The Client Network service terminated unexpectedly

Path statement is as follows....

C:\WINDOWS;C:\WINDOWS\System32;C:\WINDOWS\System32\Wbem;C:\Program
Files\Citrix\system32;C:\Program






Files\Citrix\System32\Citrix\IMA;C:\Program






Files\Citrix\System32\Citrix\IMA\Subsystems;c:\windows\crystal;C:\Utils;;

HELP!

:)

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On






Behalf






Of Philip Walley
Sent: Tuesday, December 20, 2005 7:39 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

are you at the latest client? v9.15?

Schneider, Chad M wrote:









I know...

Does not work from any PC though.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On








Behalf








Of Philip Walley
Sent: Monday, December 19, 2005 4:02 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

i swear it sounds like a ts licensing issue

Schneider, Chad M wrote:











Notepad failed to start.

Back to square one.  Published desktops work....published apps do not.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On










Behalf










Of Schneider, Chad M
Sent: Monday, December 19, 2005 2:21 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Published desktops work....

Published apps., I am still confirming.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On










Behalf










Of Philip Walley
Sent: Monday, December 19, 2005 2:07 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

so published apps are working in the 3 environment now?


Schneider, Chad M wrote:













I think that was it, at least for the now MPS 3.0 server....that






article,






reg. change appears to have worked.

Also found that this server MUST be MPS 3.0, as it creates "client\"












printer












names for auto-created, PS 4.0, when set to use legacy printer




creation,




creates as "client/". We have hundreds of user's INI's poiting to




their




Citrix printer as "client\".

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On












Behalf












Of Philip Walley
Sent: Monday, December 19, 2005 12:59 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

ok, that's TS licensing. 2 things, since you rolled back, you'll need this http://support.citrix.com/kb/entry!default.jspa?categoryID=275&externa


l






I










D














=


















C




















T












X107196&fromSearchPage=true

also, once that's done, try deleting your mslicensing key and




restarting














your workstation. if that doesn't work, you may have to delete the


x509










and certificate entries on the server itself. could be a corrupt






license.






Schneider, Chad M wrote:















Launching published desktop, I get this almost immediately.

Network or dial-up problems.....

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On














Behalf














Of Schneider, Chad M
Sent: Friday, December 16, 2005 1:28 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Am able to rdp.

Telnet to 1494, successful.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On














Behalf














Of Philip Walley
Sent: Friday, December 16, 2005 1:23 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

telnet to 1494?

Schneider, Chad M wrote:

















Confirmed.



--------------------------------------------------------------------


-






-










-














-








*From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]





*On Behalf Of *Edward VanDewars
*Sent:* Friday, December 16, 2005 1:09 PM
*To:* thin@xxxxxxxxxxxxx
*Subject:* [THIN] Re: failed to start.



Are you sure you didn't disable logins on those servers?

On 12/16/05, *Schneider, Chad M* <CMSchneider@xxxxxxxxx <mailto:CMSchneider@xxxxxxxxx>> wrote:

Get this...uninstalled PS 4.0, installed MPS 3.0, same things....but




I














can
not even launch published desktop now.



















************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


















************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
















************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************














************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************












************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************










************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************








************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************






************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************




************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************

Other related posts: