[THIN] Re: failed to start.

  • From: "Schneider, Chad M" <CMSchneider@xxxxxxxxx>
  • To: thin@xxxxxxxxxxxxx
  • Date: Fri, 16 Dec 2005 15:52:34 -0600

I uninstalled 4.0 and then installed 3.0, at least with 4.0, published
desktops work.

I will install SP1 for 2003, see if that fixes anything.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Maddox, Cole
Sent: Friday, December 16, 2005 3:14 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Hello Chad,

Have you tried running lsview from the workstation in question?  Also,
have you verified that both your terminal server and Citrix license
servers are working properly?

Which client are you using?  Have you tried any other clients?

Cole.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Schneider, Chad M
Sent: Friday, December 16, 2005 4:04 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Launching published desktop, I get this almost immediately.

Network or dial-up problems.....

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf
Of Schneider, Chad M
Sent: Friday, December 16, 2005 1:28 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

Am able to rdp.

Telnet to 1494, successful.

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf
Of Philip Walley
Sent: Friday, December 16, 2005 1:23 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: failed to start.

telnet to 1494?

Schneider, Chad M wrote:

> Confirmed.
>
>  
>
>
------------------------------------------------------------------------
>
> *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] 
> *On Behalf Of *Edward VanDewars
> *Sent:* Friday, December 16, 2005 1:09 PM
> *To:* thin@xxxxxxxxxxxxx
> *Subject:* [THIN] Re: failed to start.
>
>  
>
> Are you sure you didn't disable logins on those servers?
>
> On 12/16/05, *Schneider, Chad M* <CMSchneider@xxxxxxxxx 
> <mailto:CMSchneider@xxxxxxxxx>> wrote:
>
> Get this...uninstalled PS 4.0, installed MPS 3.0, same things....but I

> can
> not even launch published desktop now.
>
>  
>
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************

************************************************
For Archives, RSS, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************

************************************************
For Archives, RSS, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************

************************************************
For Archives, RSS, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
************************************************

Other related posts: