i maintain a second WI site for my administrators. I also have a folder on our share with .ica files for each server. Some of the admins just make a shortcut to that folder on their desktop. On Tue, Jan 25, 2011 at 7:09 AM, Bruce Ricker <brucericker@xxxxxxxxx> wrote: > Have you seen the quicklaunch tool? I've been using that for > administrative work and testing... > > On 1/25/11, Hutchinson, Alan <Alan.Hutchinson@xxxxxxxxxxxxxxxxxx> wrote: > > I'm just starting to look at upgrading the ICA client currently used on > > our estate from 10.2 to 12.1 and am foxed by this issue. > > > > Currently with the 10.2 client we just used PN (no PNA) and Web client. > > The web client is used by users with a PC and all our support functions > > and they all access the same web site URL. This site is configured for > > pass through authentication and the Management Console is configured for > > custom administrators using their normal (non-elevated) userids. PN is > > used by our higher level support functions to access individual servers > > and they can then log in using their elevated credentials. I also have a > > test site which requires authentication so that I can log on with one of > > my test accounts for any application testing as a standard user. All > > well and good. > > > > Clearly the 12.1 client doesn't have a PN component and I'm keen to move > > to a PNA environment anyway. Have installed the full 12.1 plug-in on a > > couple of test PCs and set up a PNA site and this all works well and I > > believe it will satisfy the vast majority of users and most of our > > support functions. The issue I have is with adnministrative access to > > published desktops. I have set up a.n.other site which requires > > authentication and when I log in using my administrator credentials I > > can see all the desktops that are published for administrators. > > Selecting one of the Desktops and it starts as expected. The problem > > comes when I connect to another Desktop (from a different server, with a > > different name etc.). The first Desktop disappears and log progresses on > > the second Desktop. Connection Centre and the Console shows two Desktops > > but only one is visible. This happens for all further Desktop > > connections. > > > > If I login locally as an Administrator then the PNA shows all Desktops > > and I can connect to each without them disappearing !!. > > > > W2K R2 PS4.5 > > Windows XP SP3 I.E.8 and Windows 7 I.E.8 > > W.I. 4.6 > > > > Apologies for the length of this. > > > > Regards, > > > > Alan. > > > > -- > Sent from my mobile device > ************************************************ > For Archives, RSS, to Unsubscribe, Subscribe or > set Digest or Vacation mode use the below link: > //www.freelists.org/list/thin > Follow ThinList on Twitter > http://twitter.com/thinlist > ************************************************ >