[THIN] Re: XenApp 5.0 Printing
- From: "Paul Bergson (ALLETE)" <pbergson@xxxxxxxxxx>
- To: "thin@xxxxxxxxxxxxx" <thin@xxxxxxxxxxxxx>
- Date: Fri, 18 Sep 2009 11:03:45 -0500
No
X86 2003 sp2
Thanks
Paul
pbergson@xxxxxxxxxx<mailto:pbergson@xxxxxxxxxx> (e-mail)
pbbergs@xxxxxxx<mailto:pbbergs@xxxxxxx> (IM)
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of
Greg Reese
Sent: Friday, September 18, 2009 11:02 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: XenApp 5.0 Printing
are these 64bit servers?
On Fri, Sep 18, 2009 at 10:57 AM, Paul Bergson (ALLETE)
<pbergson@xxxxxxxxxx<mailto:pbergson@xxxxxxxxxx>> wrote:
11.0.0.5357
Thanks
Paul
From: thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>
[mailto:thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>] On Behalf
Of Jeff Pitsch
Sent: Friday, September 18, 2009 10:51 AM
To: thin@xxxxxxxxxxxxx<mailto:thin@xxxxxxxxxxxxx>
Subject: [THIN] Re: XenApp 5.0 Printing
Greg brings up a great point about the client version. What version of client
are you using?
On Fri, Sep 18, 2009 at 11:32 AM, Paul Bergson (ALLETE)
<pbergson@xxxxxxxxxx<mailto:pbergson@xxxxxxxxxx>> wrote:
I have imported the drivers from my print server and the default ones for my
test user exists on this server. If I go into the Presentation Server Console
the drivers show up for the printer. So I don't see why it won't map. I
didn't put the server into install mode for any of the printer driver installs.
Is this required.
The policy is applied to domain users. Is there anything misconfigured in the
policy itself?
What is the Citrix Control Panel -or- is that the Presentation Server Console
Thanks
Paul
From: thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>
[mailto:thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>] On Behalf
Of Jim Kenzig
Sent: Friday, September 18, 2009 9:58 AM
To: thin@xxxxxxxxxxxxx<mailto:thin@xxxxxxxxxxxxx>
Subject: [THIN] Re: XenApp 5.0 Printing
Install the printer drivers on your servers. Do a change user /install and
install the drivers of the printers you want. Then do a change user /execute
from the command prompt after the installation. Once the printer is installed
delete the printer from the printers control panel. The drivers will then be
available on the server and should load the printer for the user. You can then
use the citrix control panel to migrate the printer drivers to other servers if
you have a lot of them.
Jim Kenzig
Blog: http://www.techblink.com<http://www.techblink.com/>
Twitter: http://twitter.com/kenzig
On Fri, Sep 18, 2009 at 10:46 AM, Paul Bergson (ALLETE)
<pbergson@xxxxxxxxxx<mailto:pbergson@xxxxxxxxxx>> wrote:
We recently updated from Metaframe XP to a new farm with XenApp 5.0. I had
hoped once we got to the new farm my printing issues would subside.
Short term at least, I have more issues instead of less. My guess is I don't
have a strong enough understanding of the new system.
I have rolled out Notepad as my first application and I can't seem to get
anything but the XPS printer to show up. I have imported my 2 print servers
successfully. I logged on the XenApp server as an admin and installed a couple
of printers and when I log onto NotePad with the admin account the printers do
show up, but that isn't an option for my user base.
My policy settings are below (No other settings are defined):
Printing
Client Printers
Auto-Creation - Enabled
Auto-Create the client's default printer only
Legacy client printers - Enabled
Create dynamic session-private client printers
Printer properties retention - Enabled
Retained in user profile only
Print job routing - Enabled
Connect directly to network print server if possible
Turn off client printer mapping - Disabled
Drivers
Native printer driver auto-install - Enabled
Do not automatically install drivers
Universal driver
Use universal driver only
Session printers - Enabled
No printers defined
Choose client's default printer: = Set default printer to the client's
main printer
I have tried to get XPS working
http://support.citrix.com/article/CTX118554
Talks about XPS but this option isn't even available in the registry and I
tried installing via
http://www.brianmadden.com/blogs/gabeknuth/archive/2008/12/16/xenapp-5-feature-profile-citrix-universal-xps-printer-driver.aspx
I'm stumped? Any help appreciated.
Thank-You
Paul Bergson
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com<http://thinmaillist.blogspot.com/>
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************
Other related posts:
