Generator Microsoft Word 11 (filtered medium) Hi Greg & Jeremy, Thanks you hit the nail on the head, I do only have one XML server listed. I' ll look at adding in other servers and the web interface config. Cheers guys!! Al Not the server running the web interface, but in the web interface configuration in the farm setup section. You enter the list of XML servers running your farm. Do you have more than one of your farms servers listed there? From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Jeremy Saunders Sent: Wednesday, 12 August 2009 10:34 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: XenApp 4.5 question? J I think what Greg meant was. in the Web Interface configuration you point it to a Farm. Under that setting you add the XML servers. You need to add multiple XenApp servers at that point. If Web Interface is having issues contacting the first XML service, it' ll then try the next one. So there are a couple of ways to do this. I personally always configure the following DNS hosts. - Ica - points to the Primary Zone Data Collector - Ica2 - points to the Backup Zone Data Collector - Icabackup - points to the failover Primary Zone Data collector - Icabackup2 - points to the failover Backup Zone Data Collector These are the 4 records I use in the web interface config. I never use server names, as it doesn' t give you a lot of flexibility. Cheers, Jeremy. From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of alan tropper Sent: Wednesday, August 12, 2009 10:21 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: XenApp 4.5 question? Hi Greg, I only have one server running Web Interface, but this server was up and running OK??? Cheers Al From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Greg Reese Sent: Wednesday, 12 August 2009 9:17 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: XenApp 4.5 question? how many of your farm's servers are configured in the Web Interface setup? Add several On Tue, Aug 11, 2009 at 8:10 PM, alan tropper <alan.tropper@xxxxxxxxxxxxx> wrote: Hi Experts, Just a quick question, this morning I had an issue with my Data Zone Collector which is also my citrix and TS license server. When anyone tried to log into the WI there was no authentication. I checked the CSG event logs and saw lots of SOCKS errors event ID 131 When running the AMC on any citrix server it wouldn' t load so I had to re-boot the data collector which in turn fixed everything. My concern is that I would have thought a data collector election would have taken place and another XenApp server would have been elected. I have checked the config and all servers are in the list for preferred so not sure why I have a single point of failure here. ..any ideas?? Cheers Al Alan Tropper Wintel Customer Service Centre Information and Communication Technologies Department of Education and Training | 151 Royal Street, East Perth WA 6004 Tel:(08) 92645550 or 5555 | Fax: (08) 9264 4701 | alan.tropper@xxxxxxxxxxxxx Confidentiality and Privilege Notice This document is intended solely for the named addressee. The information contained in the pages is confidential and contains legally privileged information. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone, and you should destroy this message and kindly notify the sender by reply email. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you.