[THIN] Windows 2003 TS Network Printer issue

  • From: Paul Adams <padams@xxxxxxxxxxxxxxx>
  • To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
  • Date: Thu, 13 Nov 2003 12:20:47 -0500

I'm just feeling dumb here today.  I have a new Windows 2003 TS that I am
testing.  No Citrix on this one.  I set up a network printer on it that
points at an existing Windows 2000 Print server.  No trouble.  But no one
but the administrator that setup that printer connection can see the
printer.  I've gone back and checked permissions both on the terminal server
and on the print server and it all seems good.  Is there a way to print to
this print server and have my users see it or should I just break down and
set the printer up as local and point right at its IP address.
Paul Adams
Network Support Specialist
Unicare Corporation
Cleveland, OH 44103
Email: padams@xxxxxxxxxxxxxxx

any attachments, is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. Any unauthorized review,
use, disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply e-mail and destroy all copies
of the original message. 

Other related posts: