[THIN] Re: WI4.2 address translation

  • From: gabriel.j.byrne@xxxxxx
  • To: thin@xxxxxxxxxxxxx
  • Date: Wed, 20 Sep 2006 16:50:18 +0100

Some further findings with this config when i look at the webinterface.conf
i can see the  mappings exactly as i expect. i have rebooted the appsrv
after adding the [public ip as altaddr with no joy . i have session
reliability enabled but this should have no effect unless i experience an
outage ( the apps should be on 1494 not 2598)

anyway as usual nothing remotely helpful on the citrix site . product.....
old docs .... i will write a step by step and send once i get this working


Gabriel Byrne
Tel: 016418730
Mob: 086 8520515

                      "Joe Shonk"                                               
                      <joe.shonk@gmail         To:      <thin@xxxxxxxxxxxxx>    
                      .com>                    cc:                              
                      Sent by:                 Subject: [THIN] Re: WI4.2 
address translation                                           
                      20/09/2006 16:19                                          
                      Please respond                                            
                      to thin                                                   

I noticed youâre a bankâ  I would highly suggest using CSG (which is free)
or CAG for external access.


From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of gabriel.j.byrne@xxxxxx
Sent: Wednesday, September 20, 2006 5:56 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] WI4.2 address translation

Hi all,

I am configuring the WI 4.2 for external access.

I have set the the following in address mappings

Internal IP WI:80 --------->external IP:80 and the users can hit the WI no

but when they attempt to launch the app they get a "there is no citrix
metaframe server specified on the configured address" error

to remedy this i have done the following

Internal APP server IP:1494 -------->external IP:1494

both ports 80 & 1494 are open on the firewall (once this works i will also
open 2598 for SR)

in addition i have set the DMZ settings to

default --------------> direct
external ip mask ------------->translated

should this work? what i am trying to avoid is having to go to each server
and configure an alternate address



This document is strictly confidential and is intended for use by
the addressee unless otherwise indicated.

This email has been scanned by an external Email Security System.

Allied Irish Banks

GIF image

GIF image

Other related posts: