[THIN] WI and different access methods
- From: "Jay Miller" <JMiller@xxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Mon, 4 Feb 2008 09:57:59 -0500
Curious if anyone can lend some insight into how to configure this...
PS40 w/ Web Interface....no Secure Gateway.
Client uses WI to access their apps in 2 distinct ways:
- Over p2p circuit to hosted network
- From Internet.
How would/should WI be configured for both access methods to work?
Direct doesn't seem to make much sense in this case, as it's configured
that way now....which worked fine when the servers had routable IP
addresses.
Note: Servers were previously configured w/ a routable IP address.
That changed this weekend, and now published apps are accessible only
from p2p circuit, not from internet.
Any insight would be appreciated....
Thanks in advance.
- Jay
Other related posts:
- » [THIN] WI and different access methods
