[THIN] Re: Using GPO to hide drives...
- From: "Steve Rance" <Steve.Rance@xxxxxxxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Mon, 25 Nov 2002 12:27:51 -0000
I have changed the system.adm in the folder with the same UID as shown =
in the properties for the GPO to contain the extra drives but going back =
into the GPO the changes are not shown. Is there anything else I have =
to do?
Thanks,
Steev
-----Original Message-----
From: Jamie Marshall [mailto:jamie.marshall@xxxxxxxxxxxxxxxxxxxx]
Sent: 25 November 2002 11:31 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: Using GPO to hide drives...
No...you are obviously using an AD domain......go into AD Users and
Computers, open the policy in question and look at its properties. This
will give you the UID you are looking for. Now browse to the folder of =
the
same name and change this system.adm. If you are using standard adm =
file
(ie you haven't modified them before) I can send one that will do the =
job
for you if you like....just let me know what drives you want hiding.
Jamie
Jamie Marshall
Solutions Architect
Dataplex Systems Ltd.
=20
t 0161 786 7019
f 0161 707 3344
w http://www.dataplex-systems.com
e mailto:jamie.marshall@xxxxxxxxxxxxxxxxxxxx
=20
-----Original Message-----
From: Steve Rance [mailto:Steve.Rance@xxxxxxxxxxxxxxxxxxxxx]=20
Sent: 25 November 2002 11:16
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Using GPO to hide drives...
Thanks for the info Jamie,=3D20
I have found the required location in system.adm however I have 7 of =3D =
them
all the same size and date.=3D20 =3D20 1 in C:\WINNT\inf 3 in
C:\WINNT\SYSVOL\domain\Policies\<sid id>\Adm 3 in
C:\WINNT\SYSVOL\sysvol\<domainname>\Policies\<sid id>\Adm
Do I have to change all 7 AND on all DC's? Anything I should be aware =
=3D of?
-----Original Message-----
From: Jamie Marshall [mailto:jamie.marshall@xxxxxxxxxxxxxxxxxxxx]
Sent: 25 November 2002 10:31 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: Using GPO to hide drives...
You need to edit the .ADM file that you are using to something like
below.....
POLICY !!NoDrives=3D20
EXPLAIN !!NoDrives_Help
PART !!NoDrivesDropdown DROPDOWNLIST NOSORT REQUIRED
VALUENAME "NoDrives"
ITEMLIST
NAME !!ABOnly VALUE NUMERIC 3
NAME !!COnly VALUE NUMERIC 4
NAME !!DOnly VALUE NUMERIC 8
NAME !!ABConly VALUE NUMERIC 7
NAME !!ABCDOnly VALUE NUMERIC 15
NAME !!MNOPOnly VALUE NUMERIC 61440
NAME !!ALLDrives VALUE NUMERIC 67108863
DEFAULT=3D20
; low 26 bits on (1 bit per drive)
NAME !!RestNoDrives VALUE NUMERIC 0
END ITEMLIST
END PART =3D09
END POLICY
POLICY !!NoViewOnDrive
EXPLAIN !!NoViewOnDrive_Help
PART !!NoDrivesDropdown DROPDOWNLIST NOSORT REQUIRED
VALUENAME "NoViewOnDrive"
ITEMLIST
NAME !!ABOnly VALUE NUMERIC 3
NAME !!COnly VALUE NUMERIC 4
NAME !!DOnly VALUE NUMERIC 8
NAME !!ABConly VALUE NUMERIC 7
NAME !!ABCDOnly VALUE NUMERIC 15
NAME !!MNOPOnly VALUE NUMERIC 61440
NAME !!ALLDrives VALUE NUMERIC 67108863
DEFAULT=3D20
; low 26 bits on (1 bit per drive)
NAME !!RestNoDrives VALUE NUMERIC 0
END ITEMLIST
END PART =3D09
END POLICY
Remember to edit the bottom of the ADM to reflect the changes in the =3D
policy section. There are loads of tools to figure out the decimal for =
the
=3D drives to hide, but this can just as easily be done with notepad and
calc.exe. =3D Add 1 under the drive you want to hide, copy the string =
of
number into =3D calc.exe, whilst in scientific view with biary selected =
and
then tick the dec =3D radio button....hey presto.
ZYXWVUTSRQPONMLKJIHGFEDCBA
00000000000111000000000000
Jamie
Jamie Marshall
Solutions Architect
Dataplex Systems Ltd.
=3D20
t 0161 786 7019
f 0161 707 3344
w http://www.dataplex-systems.com
e mailto:jamie.marshall@xxxxxxxxxxxxxxxxxxxx
=3D20
-----Original Message-----
From: Steve Rance [mailto:Steve.Rance@xxxxxxxxxxxxxxxxxxxxx]=3D20
Sent: 25 November 2002 10:20
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Using GPO to hide drives...
I have used the GPO "Hide these specificed drives in My Computer" and =
=3D =3D3D
"Prevent access to drives from My Computer" in the past to restrict =
=3D3D =3D
access to the C: and D: drives. I now want to do the same but for the =
=3D3D
N: and M: drive, however the only options in the drop down list are for =
=3D
=3D3D the A,B,C & D drives only.
Is there a way I can include N and M in the list?
Thanks,
Steve
***********************************************=3D20
This Weeks Sponsor
OneApp Total Control
Control, Secure and Audit your Thin Client Systems =3D =
http://www.oneapp.co.uk
***********************************************=3D20
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The =3D =
service
is powered by MessageLabs. For more information on a proactive =3D =
anti-virus
service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
*************************************************************************=
=3D
*************
THIS EMAIL AND ANY ATTACHED FILES IS/ARE CONFIDENTIAL=3D20
AND LEGALLY PRIVILEGED. If you are not the addressee, any=3D20 =
disclosure,
reproduction, copying, distribution, or other dissemination=3D20 or use =
of
this communication is strictly prohibited. If you have =3D received=3D20 =
this
transmission in error please notify Dataplex Systems Limited on=3D20
+44 (0) 161 707 3355 immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could arrive late or incomplete, or contain viruses. =3D
Dataplex=3D20 Systems Limited therefore does not accept liability for =
any
errors or omissions in the contents of this message which arise as a =
result
of=3D20 email transmission. If verification is required please request a =
hard
=3D copy version signed by or on behalf of Dataplex Systems Limited.
Copyright in this email and any documents created by Dataplex =
Systems=3D20
Limited will be and remain vested in Dataplex Systems Limited, we assert =
=3D
the right to be identified as the author of and to object to the misuse =
=3D
of=3D20 this email and such documents.
*************************************************************************=
=3D
*************
________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The =
service
is powered by MessageLabs. For more information on a proactive =
anti-virus
service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
***********************************************=3D20
This Weeks Sponsor
OneApp Total Control
Control, Secure and Audit your Thin Client Systems =
http://www.oneapp.co.uk
***********************************************=3D20
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
***********************************************=20
This Weeks Sponsor
OneApp Total Control
Control, Secure and Audit your Thin Client Systems =
http://www.oneapp.co.uk
***********************************************=20
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The =
service
is powered by MessageLabs. For more information on a proactive =
anti-virus
service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
*************************************************************************=
*************
THIS EMAIL AND ANY ATTACHED FILES IS/ARE CONFIDENTIAL=20
AND LEGALLY PRIVILEGED. If you are not the addressee, any=20
disclosure, reproduction, copying, distribution, or other dissemination=20
or use of this communication is strictly prohibited. If you have =
received=20
this transmission in error please notify Dataplex Systems Limited on=20
+44 (0) 161 707 3355 immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as
information could arrive late or incomplete, or contain viruses. =
Dataplex=20
Systems Limited therefore does not accept liability for any errors or
omissions in the contents of this message which arise as a result of=20
email transmission. If verification is required please request a hard =
copy
version signed by or on behalf of Dataplex Systems Limited.
Copyright in this email and any documents created by Dataplex Systems=20
Limited will be and remain vested in Dataplex Systems Limited, we assert =
the right to be identified as the author of and to object to the misuse =
of=20
this email and such documents.
*************************************************************************=
*************
________________________________________________________________________
This e-mail has been scanned for all viruses by Star Internet. The
service is powered by MessageLabs. For more information on a proactive
anti-virus service working around the clock, around the globe, visit:
http://www.star.net.uk
________________________________________________________________________
***********************************************=20
This Weeks Sponsor
OneApp Total Control
Control, Secure and Audit your Thin Client Systems
http://www.oneapp.co.uk
***********************************************=20
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
***********************************************
This Weeks Sponsor
OneApp Total Control
Control, Secure and Audit your Thin Client Systems
http://www.oneapp.co.uk
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
