to chime in on this as well... You can also try manually setting the IP address and see if you have any = trouble. I have problems with the EON 2000 getting stuck on an IP = address if its DHCP lease has expired and the address it had gets = reassigned. Resetting to default settings does not help either. It = still wants that original address. Greg -----Original Message----- From: John A. Vorchak [mailto:jvorchak@xxxxxxxx] Sent: Wednesday, September 04, 2002 11:02 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Thin Client ... NeoWare ??? Mark, Sounds like it may be trying to connect some local device and either it can't or it isn't there. Check the server to see if you have it configured to use local ports or -- more likely a client drive. Otherwise... bad NIC - the whole batch? Or possibly the firmware image that you have is shot. I would probably start at having Neoware get you a new copy of the firmware, blast it down to two or three problematic machines and test away. More than likely, the image is the problem. John Vorchak Vorchak Software Custom Windows XP Embedded and Windows NT Embedded Components and Solutions jvorchak@xxxxxxxx -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Guzzo Sent: Tuesday, September 03, 2002 11:09 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Thin Client ... NeoWare ??? Hello to all :-) We have been seeing a very strange issue with the thin clients by NeoWare. The device would give an "I/O Error" right before it should give the Windows logon screen. If you click to x out of the "I/O Error" it loops and gives the error again. If you turn the box off for about ten seconds and on again you have a 1 in 5 chance of it working. I called NeoWare tech support and thay had no idea of such an error. I asked for the latest firmware upgrade to bring the ICA client to '6.2 build 995' from '6.2 build 985'. After the firmware burn I still get this error.=20 The NeoWare tech told me to try and only use TCP (not TCP+HTTP) browsing to see if that would help. I did, it didn't :-(=20 Any ideas? NeoWare device is... WinCE ver. 3.0 Neo Rev. 5.3.1 ICA ver. 6.2 build 995 ___ Mark Guzzo Sinai Health Systems Citrix Administrator 773.257.5799 ********************************************** This weeks sponsor 99Point9.com 99Point9 helps solve your unresolved technical server-based questions, issues and incidents. http://www.99point9.com *********************************************** For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm ********************************************** This weeks sponsor 99Point9.com 99Point9 helps solve your unresolved technical server-based questions, issues and incidents. http://www.99point9.com *********************************************** For Archives, to Unsubscribe, Subscribe or=20 set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm ********************************************** This weeks sponsor 99Point9.com 99Point9 helps solve your unresolved technical server-based questions, issues and incidents. http://www.99point9.com *********************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm